Installation ocx. How to install mac os on a regular pc

For a long time You avoided the global software updates on an old Mac, but finally gave in and upgraded the computer's operating system to the latest version of macOS Sierra. Unfortunately, after the update, instead of the performance optimization promised by Apple, your machine became, to put it mildly, slow, and the new OS X features, frankly speaking, are not admirable at such operating speeds. What to do? Is it possible to downgrade, for example, from OS X El Capitan (macOS Sierra) to OS X Mavericks?

Fortunately, it is possible. Apple does not advertise methods for downgrading macOS, but at the same time does not prohibit them, as is the case with iOS.

After installing OS X Mavericks on your old Mac, you will be happy to see that your computer begins to “fly.”

Does your Mac slow down after updating to macOS Sierra (OS X El Capitan)? Install a clean OS X Mavericks

It’s worth noting right away that you can’t restore to OS X Mavericks on all Macs. For example, if you bought a Macbook with OS X Yosemite pre-installed, then the hardware will not allow OS X Mavericks to be inserted for recovery, because this version of the OS was released earlier. Most early system In this case, OS X Yosemite will be installed.

Video instructions:

Save your personal information

IN in this case It is NOT RECOMMENDED to use Time Machine backup. Since the backup will be created on latest version OS X, it’s not a fact that it will deploy correctly on more old system and whether it will unfold at all.

Ideally copy necessary files and folders to external hard drive.

To avoid issues with Find My Mac and Activation Lock, sign out of your account. iCloud recordings in System Settings. Disabling the feature will happen automatically. Learn more about the process of removing a device from account iCloud described.

IMPORTANT: Before you begin, be sure to check:

• Is the Mac tied specifically to yours and not to any other?
• Do you remember the credentials (username and password) of your Apple ID. You can check, for example, by logging into this page (from your computer).

The fact is that if the function was activated on the Mac (located along the path: System Settings -> iCloud -> ), then after reinstalling the system (resetting to factory settings), the system will ask you to enter the Apple ID to which the device is linked.

3 . Insert the flash drive into a USB port on your Mac.

4 . Open system application Disk Utility . Located on the way Programs -> Utilities.

5 . On the left side of the program, select the connected USB drive.

Important: there should be only 1 partition on the flash drive, the partition scheme is GUID.

6 . Select the only partition on the flash drive and press the button Erase in the top menu.

7 . In the field Name enter the name of the flash drive, for example, Flash. In the field Format select value.

8 . Click Erase and watch the formatting process. This may take a few minutes. When the process is complete, click Ready.

9 . Select the formatted partition of the USB flash drive (in our case, the Flash partition), open top menu Edit and select Restore.

10 . Specify the path to the OS X Mavericks image downloaded in step 2 by clicking the button Image or simply drag the image file onto the window indicating the file path.

In the field Restore to... must be indicated OS X Base System.dmg.

11 . Click the button Restore and follow the creation process Bootable USB flash drive with OS X Mavericks.

The speed of creating a bootable flash drive depends on many factors and averages 20-40 minutes. When the process is complete, click Ready.

Note: If the recovery procedure fails the first time, try again.

Format your Mac's built-in storage

1 . Restart your Mac using the menu  -> Reboot.

2 . During the reboot process, hold down the keys on the keyboard ⌘Cmd And R, after which the Mac will boot into recovery mode.

3 . In the window that appears OS X Utilities select item Disk Utility and press Continue.

4 . Select the partition of the system drive intended for the system and click the button Erase in the top menu.

5 . In the Format field, select a value OS X Extended (Journaled) and press the button Erase.

The process of formatting the system drive partition will begin. When finished, click Ready.

Restore Mac to OS X Mavericks

1 . Insert a bootable USB flash drive containing OS X Mavericks into a USB port on your Mac.

2 . Restart your Mac using the menu  -> Reboot.

3 . During the reboot process, hold down the key on the keyboard ⌥Option (Alt), after which a list of drives from which you can boot your computer will appear on the screen.

4 . Select the bootable USB flash drive with OS X Mavericks, it will be called OS X Base System.dmg.

5 . The OS X Mavericks installation process will begin. Follow the instructions on the screen.

With its own pre-installed Mac OS operating system. Like all the company's products, it claims to be of exclusive quality and the use of advanced technologies. On at the moment The following varieties are available for sale:

• MacBook;
• MacBook Air;
• MacBook Pro.

Find out how to update your Mac's OS in the article below.

MacBook Pro is available in 13-inch and 15-inch sizes and in different specifications. All Mac models are equipped with Intel processors, the battery life without recharging is up to 10 or up to 12 hours.

The newest operating system currently used on Mac computers is Mac OS Sierra. Older versions of the OS can be updated for free via the Internet. The company's main advantage of the system is that it was created specifically for Mac equipment. Unlike Windows, which is installed on the most computers different manufacturers. By the way, now MacBook Pro and other models support the ability to install Windows.

MacBook Pro and others are already on sale with installed system. However, in some cases, you may need to install or reinstall Mac OS on your MacBook. It is necessary to distinguish between the terms:

• The installation is otherwise called a “clean” installation, which is performed on a blank (formatted) hard drive or on a new one.
• Reinstallation is when new system installed on top of the old one without full formatting and saving user data.

The need to install and reinstall Mac OS occurs when there are serious problems with its operation, failed update. Like Windows, it still leaves behind garbage, which over time leads to slowdowns, freezes and other troubles. We will consider these processes using the example of the latest operating system, namely Mac OS Sierra. For previous versions, for example Mac OS X, essentially there will be no differences, but it is still recommended to update to the latest version if your device supports it.

Operating system installation

A clean installation may be necessary if you decide to sell your laptop and need to permanently remove all data and Apple ID from it, or if there is a serious system problem. The installation algorithm on a MakBook Pro looks like this:

1. Data backup.
2. Creating a bootable USB flash drive.
3. System installation.

For backup data use external storage and the Time Machine program, which automatically starts when connected removable media. The utility will ask whether to use external drive for backup, click “Use.” as a backup drive."

After the backup is complete, you need to make a bootable USB flash drive using disk utility:

MacBook Pro will find it itself the desired image on the flash drive and will begin installing the Mac operating system. You just need to follow the instructions on the screen.

Reinstalling the operating system

You can reinstall the system from the OS recovery menu on Mac OS, which is called up by a key combination during boot:

• Command+R - reinstalls the latest version of the OS installed on the Mac, without updating to the latest.
• Option+Command+R - update to the latest compatible Mac OS.
• Shift+Option+Command+R - if your Mac already has macOS Sierra 10.12.4 or higher installed modern version, then pressing the combination will allow you to reinstall the OS that came with your Mac laptop.

After pressing these key combinations, a menu will appear in which you need to select “Reinstall Mac OS”. Next, do the following:

1. When the name Mac OS Sierra is displayed, click Next.
2. Select the drive on which you will install the system (usually called Macintosh HD).
3. The system reinstallation will begin, after which the Mac laptop will boot as usual.

All data, including passwords and Apple IDs, will be saved, as well as user data. But create it anyway backup copy before starting the reinstallation just in case. Reinstallation is also sometimes called recovery, as it often helps solve performance and performance problems. If the problems have not been corrected, then you can already try installing the system with formatting boot disk on your MacBook, not forgetting to copy all the data to external media, because after such a procedure they will all be deleted.

Mac OS X ORIGINAL (Retail 10.5.0)!

Hi all.

Many thanks to everyone who reads my blog and who finds it interesting. It's very nice that they read me.

Introduction.

There are rumors that if your motherboard supports the native axis core (Mac OS X), then you can install it. This is not about hackintosh. This is what we will look at today using my example.

I express my deep gratitude to osikog (torrents.ru) and vlzhukov (forum.usemac.ru) for their invaluable help.

What was in theory became reality. I am now writing this note from under Mac OS X ORIGINAL (Retail 10.5.0 + Apple Software Update 10.5.5) now I have a real axis.

Let's take action.

What we need:

1 free flash drive of any size, up to 64 MB (it will be bootable)

2 a lot of free time

3 bootloader for flash drive (external)

4 bootloader (internal)

5 1 HDD with GUID markings (do not install on MBR, you don’t even have to try) what GUID and MBR are can be found here - http://en.wikipedia.org/wiki/Master_boot_record (MBR) and here - http:// ru.wikipedia.org/wiki/Partition_Table_GUID (GUID) it doesn't work when paired with vents

6 right hands and desire

7 image of a reel Mac OS, preferably not on disk, but as a separate image file (.dmg .toast)

8 installed somewhere Windows (2000, XP, wiiiiiiista)

9 hackintosh which is 100% installed on your computer (drivers are not required)

I did all the steps described below on my computer and all the drivers are suitable for me, if you have different hardware, you may need to download driver images for your hardware here http://forum.insanelymac.com/ (search by boot 132):

motherboard: ASUS P5K-E WiFi/AP (Intel High Definition Audio ADI1989B\USB\LAN Marvell Yukon 88E8056\Realtek RTL8187B WiFi)

CPU: Intel Core 2 Duo E6400

broom: HDD Samsung SATA2 320GB

video: nVidia GeForce 8800 GT 512Mb MSI

drive: ASUS DRW-2014L1T Sata

So.

Let's begin.

To make it at least clear what we will do, I’ll try to explain a little (I don’t understand much myself)

It’s just that many factors prevent the axis from being installed, one of them is the preloading of drivers and system identifiers. I think I'm saying it right. Otherwise, I understand something, but I can’t say it. In short, you don’t need to know all this. Let's get started.

1 You will need the archiver syslinux-3.71.zip which can be downloaded here http://depositfiles.com/files/8386903. Next we will need a couple more files and an image. You can get them here http://depositfiles.com/ru/files/8387261. Next. We load into the windows for the first and last time, insert the flash drive, remember its letter - this is important, you will need it later.

Click start - run - enter - cmd - enter - then in the com window. lines we write the following commands: ( first format the flash drive in FAT32 and copy the contents of syslinux-3.71.zip to the root of drive C: and rename the syslinux-3.71 folder to syslinux)

syslinux.exe -ma K: where K: this is the letter of the flash drive (I just have this letter, but yours may be different)

This command copies one idlinux.sys file to the flash drive and makes the flash drive bootable. If everything is fine, then you will then see a line like:

c:\syslinux\win32>

Next, open archive number 2. There we see INITRD.IMG and the BOOTER.zip archive. We unpack the archive into the same folder and we have 5 files (INITRD.IMG, syslinux.cfg, boot, mboot.c32, syslinux.sys) necessary for normal loading. Copy them to the root of the flash drive. Voila, the flash drive is ready. You can check its operation just in case.

Selecting a disk after booting from a flash drive.

This is done by entering the disk number (81, 82, 83, etc.) 80 is the flash drive itself. Exit to the number entry menu using the ESC key.

Okay, the flash drive is ready. We have 6 files on it that are responsible for a full download. But one file differs from the others in that it is very interesting to us. Namely, it contains drivers for subsequent installation of the axis. Its name INITRD.IMG. Inside it lie important files. Directly in this image are the kexts for my hardware. For other hardware they need to be collected. There is a program iDMG MAC OS X with which you can create .DMG images, and they are then renamed into .img. That is, you can combine your cupcakes and make your ownINITRD.IMG or surf the web in search of the desired image.

Partition map GUIDis selected in the options button in the disk utility when dividing the broom into partitions.

• 1 section for the main axis can be called Mac 60GB
  
• 2 section for data, namely from it the original axis will be installed laterData 210GB
  
• Section 3 for temporary hackintosh Hack 30GB

We format all partitions in HFS+ journaled using the erase button

The layout of the guide sections is interesting. We read the wiki and are not surprised that the working space of a broom is smaller than its nominal size. After all the transformations.

So we sorted out the broom. This is all configured during installation of the hack. Next we put the hack in section 3. We take our image with the original axis and expand it to the root of the 2nd section. Restore to disk utility function. Everything there is done with drag drop. In the “what” field we drag our image, and in the “where” field we drag our Data section (on the left side of the utility disk) and click the restore button. We are waiting. It took me about 13 minutes. That's it. In this simple way we made a place from where we will install the axle.

Insert the flash drive and God bless you

After expanding the image, we reboot the computer and boot from the flash drive. Enter the disk number. And then select our section Data for downloading and inter. You can also enter the key -v to see the download progress. If everything is good, then we saw a menu with a choice of language. This is very good.

At least I had possible difficulties at this stage.

Because of my 8800Gt card I didn't see this menu. Instead, I saw a “space” wallpaper and a mouse that was spinning. The conclusion is that I had to pull out my card and insert the 7600Gt. It turns out that the axis does not know the 8800GT in version 10.5.0. And he doesn’t want to be friends with her under any circumstances. The axis will be friends with my card in 10.5.4 and 10.5.5 for sure, but I haven’t tried it in other versions.

So here it is. Having changed the card to 7600Gt, I started further. Choose a language. Whatever we want they have everything in the distribution. We select firewood for the printer and where to install the axis. In our case it is our section number 1 Mac. After 5-10 minutes you will see a message saying that everything is up and running. Installation from a broom is much faster than from a disk. Don't be surprised. So the installer prompts us to reboot, which we do, but we boot again from the flash drive. Now the flash drive replaces the bootloader. This is due to the fact that in real Macs the bootloader is built into the motherboard or into a ROM (Read Only Memory, like a BIOS) somewhere on the motherboard or somewhere else. That's basically it. We received the original axle. Which runs on your computer. This gives you the opportunity to update it from off. site.

Installing the internal bootloader

there are 2 ways to go here

1 if you can’t boot from a flash drive, then you can leave it like that. The only thing you can do is reduce the time it takes to read the INITRD.IMG file by rebuilding it using the program iDMG MAC OS X.

2 you can install an internal bootloader Chameleon DFE for Hard Disk. You can get it here http://depositfiles.com/files/8388004. The archive contains a bootloader that needs to be installed on the partition Mac, and there is also a folder thereINITRD. There is a folder in it EXTRA, and out Extensions. When you start installing the bootloader, you will see 4 icons on a black background: readme, installing the bootloader itself, the record icon, and the blue folder. This is what interests us. BEFORE INSTALLING THE LOADER, YOU NEED TO COPY THE CONTENTS OF THE EXTRA FOLDER (I.E. THE FOLDERExtensions ) INTO THE BLUE FOLDER USING THE DRAGEN-DROPP METHOD. Only then do we install the bootloader into our partition. Then the test. That is, we take out the flash drive and reboot. If all is well, the axis will boot. In a folder INITRD the archive contains drivers for my mother and system.

In general, everything. We have a working axis. Now you can download updates. Install drivers. Eat great program to configure the system and install firewood - OSX86Tools.

The Hackintosh that we installed does not need to be removed. Might come in handy.

I found it useful. We remember the problem with the card.

I'll tell you how I solved the problem. I downloaded the update and installed it. turned off the computer and inserted the card. booted into safe mode(-x) installed the card using OSX86Tools using the method of adding strings. Voila everything works.

First, we need to understand the names and correct spelling of this operating system. On personal computer(PC) you can install Mac OS X or macOS - that’s what it’s been called since 2016 (from 2012 to 2016 - just OS X). operating room Mac system The OS, created in 1984 and released until 2001 for computers with PowerPC architecture, has never been able to be installed on x86 devices with Intel processors.

Background

The first releases of Mac OS X were suitable for all Macintosh computers running on the PowerPC architecture. Just a few months after the announcement of Mac OS X (2002), reports appeared that the American Apple company created special version system codenamed Marklar, which can be run on x86 computers. The corporation denied all these rumors until in May 2005, illegal versions of OS X distributions for Intel appeared on torrent trackers. After that Steve Jobs stated that Apple plans to translate in 2 years Mac computers from previous processors to Intel. He presented the Developer Transistion Kit, version latest Mac OS X Tiger for developers, which could be run on Intel.

Almost immediately, the network hacker project OSx86 appeared, which began work on creating a Mac OS X distribution for Intel computers. At the beginning of 2006, Apple released the fourth generation of iMac computers, the first Macs with Intel architecture and version of the MacOSX 10.4.4 operating system for these devices. On February 14, 2006, a patched distribution of this system was released online; it could be installed on any personal computers with Intel. In 2008 it was developed convenient way installing an unpatched distribution (that is, without making changes to the OS), including those purchased legally. All computers that do not have the bitten apple logo and run macOS have since been called “hackintoshes.” Please note, this is the name of the computer, not the OS, please do not use the expression “I have Hackintosh installed on my computer.” The system is still the same, macOS. This is true, despite the fact that such headlines exist even on popular non-specialized forums.

macOS and AMD. Legality of Hackintosh

There is no reason to say that macOS cannot be installed on computers with AMD processors. You can install everything, but more or less stable operation you are unlikely to achieve it. The point is not only that you need to install images and assemblies only with a patched kernel (you can immediately forget about installing licensed images on AMD).

For macOS work on AMD must be used special utility for patching binaries. It will scan everything (!!!) available on the computer binary files and creates a script that must be run before the system boots. Any, even the smallest system update from Apple will cause your computer to malfunction. AMD processor must at least support SSE2 instructions.

All of the above fully applies to laptops with Atom processors.

As for the legality of hackintoshes - installing them on computers without Apple logo is considered piracy. The company is targeting companies that install macOS on third party computers for commercial purposes. There have been no lawsuits against private owners yet. To be fair, the same can be said about Windows. Not a single user of pirated “windows” has yet been convicted in the world for installing them on his home computer.

In this article, we'll cover how to install the latest macOS distributions on your PC, but first we'll cover the technical and theoretical side question.

Preparation and requirements

The main reason why macOS cannot be installed “on the fly” on computers with x86 architecture is that the system requires the motherboard firmware to have EFI rather than BIOS. At first, to bypass this limitation it was necessary to change the system kernel, then EFI began to be emulated at the bootloader level.

Another difficulty that awaited developers was kernel extension or simply kext. A kernel extension required for the functioning of the main applications of the system. For its operation, an SMC chip is used, which is present on the original Macs. Special file FakeSMC.kext emulates an SMC device on the board.

Actually, this bootloader file and distribution image is all we need in most cases to install macOS. The hardware requirements are the same for all versions and builds - a processor that supports SSE2 instructions, Intel Core2Duo class and higher. It is advisable that your hardware supports the functions AHCI-SATA controller, had at least 2 gigabytes RAM.

There are special sites on the Internet where a list of supported equipment is published. Before installing macOS on your PC, it is recommended to look for your hardware there. Not a bad option, especially if you have a new and powerful computer, there will be an installation of the “apple axis” on virtual computer as a workout.

With a very high probability, macOS will not cause your hardware to fail. But lose data from hard drive It is quite possible if you install the system on the same disk with Windows. The native “Windows” bootloader will be overwritten, in order to return to it later you will have to low level formatting Winchester. macOS requires at least 15 gigabytes free space.

To install macOS latest versions on PC, we recommend using products from the tonymacx86 project. Using their tools to create bootable flash drives(at least 8 GB) will allow everyone to install macOS on most without much difficulty Windows computers, at least as a second system.

Installing macOS Sierra using a Mac computer

First of all, you need to download macOS Sierra itself from a torrent tracker or from App Store(For free download). The “InstallmacOSSierra” file must be placed in the Programs subfolder.

Preparing a bootable USB flash drive

Then download the current UniBeast release from the tonymacx86 project resource, here.

Now you need a computer running macOS. Bootable USB flash drive created using the Disk Utility application.

Open it.

Locate the USB drive on the left, then click Erase at the top. Give the flash drive a different name, for example, SierraInstaller (most importantly, without spaces).

The format must be selected as OSX Extended (Journaled).
Now click on the “Erase” sign in the small window.

Launch the UniBeast application, click Continue, Agree everywhere.
In Destinationselect we define a USB flash drive.

On the OS selection tab, select “Sierra” and click Continue.

On the Graphics Configuration page, select graphic settings. On the next page, create an owner password and click Install. After some time, the flash drive will be ready.

Now you need to download the MultiBeast utility for Sierra, on the same site tonymacx86.com. Copy the file to a USB flash drive.

System installation

Put in Computer BIOS USB boot. Use the installer to format the disk. It should be called Macintosh HD and select the OSX Extended format again).

Now go back to the installer and specify the Macintosh HD drive as the target drive for macOS Sierra deployment.

After this, the system will begin to install from the flash drive.

After rebooting, you will be able to see the macOS desktop.

After that, simply open the MultiBeast utility, then install drivers for audio, video, network and other devices.

And now your PC has turned into a hackintosh.

Installing macOS Sierra using a Windows computer

To record boot boot installation flash drive You need the BDU (BootDiskUtiliy) program, and, in fact, a flash drive of 8 GB or more.
You can download the program.

Launch the program.
In the Destination disk window, select the flash drive.
Click Format disk
The program will format it for Apple HFS, then make two partitions on it, 1 with the bootloader (CLOVER), and the installer will be deployed on the second.

Now you need to find the system image. There are files on the network prepared by craftsmen that contain the necessary HFS files. Here's one to download. The same BDU program will unpack the images onto the flash drive.

The downloaded archive contains a file with the extension .hfs. You need to take it out to any place.
In the BDU “Destination disk” program window, you need to select Part 2 from the USB flash drive.
Open the “Restore partiton” tab.
Select the unpacked *.hfs file.

We will also need to download this one and unzip the PostInstall folder into the Clover section. Also download the kext file and copy it to the folder with the unpacked image. That's it, the installer is ready.

Installing macOS Sierra

Make sure that the flash drive you put into your computer will boot into UEFI mode. After the reboot, in the Clover menu, select the Options submenu and use the arrows to highlight the line as in the picture.

The installation of macOS will begin. If it freezes for more than a minute, reboot. Not always, but it helps. Once in the installer, select language pack, and then, after loading it, the already familiar Disk Utility utility.

Format the partition on your hard drive according to the instructions described in the previous chapter.

After installing the system (this will take about 30 minutes) and creating a user, keep in mind that this system is not yet working, since you cannot get into it after a reboot due to the absence of a bootloader on the disk.

Install the bootloader, kexts, drivers, utilities

You will need the Kext Utility program from the PostInstall folder (located in CLOVER on the flash drive). Run it and wait until the “All done” message appears.

Then we put the kexts on the network - you can simply drag the Network folder into the program window and again wait for the “All done” message.

Copy the FakeSMC.kext file to the PostInstall folder and install it like the previous network kext.

We perform the same operations with the USB kext. Now you have Internet and Smc chip emulation installed.

The PostInstall folder contains a Cloverv2.3kr3949 subfolder with a *.pkg file. It needs to be launched.

You will see a window like this.

Click “Configure” and do as in this picture (for UEFI boot).

Press the “Install” button.
Now you need to configure the bootloader. To do this, run the Clover Configurator program from the same PostInstall folder. On the left, click "Mount EFI", then "Check partition", select the Apple_HFS partition, it will display EFI EFI. Click "Mount partition".
In the list that appears, select the disk we need and immediately click Open Partition.
Now go to EFI (in CLOVER) and open the plist.config file.

Here select your video card and go to BOOT.

Make arguments based on your system.
arch - architecture, for example x86_64
darkwake - sleep and hibernation of your future system. There are 7 of them. Sleep and hibernation are a problem for all macOS on PCs. Selected through trial and bitter errors.
cpus=1 - if you check this box, the system will start with one core.
Set nvda_drv=1 if you have an NVidia video card.
Place the remaining checkboxes as in the picture.
Now go to the SMBIOS menu and go to iMac (if the system is installed on a PC) or MacBook (if installed on a laptop).

Please note that Nvidia video cards, without a special policy kext configuration, will only function on the iMac13.1 or iMac14.2.
Save the edited file and copy it to CLOVER.

Installing the video card driver, sound card and launching

The Post Install folder contains the WebDriver*.pkg file. Launch and reboot. When loading, select Boot macOSSierra from MacintoshHD. This is necessary to make sure that you booted not from a USB flash drive, but from a hard drive. See how correctly the system identifies your equipment.

If you have an external sound card, simply download the drivers for your Mac from the equipment manufacturer’s website. There is a kext for built-in “sounds”, which can also be installed using Kext Utility (). Setting up this driver is described in this.

In this article, we will install macOS Sierra on a computer using the BDU (Boot Disk Utility) program and a special image for this utility. Finding an image for BDU and the utility itself on Google is very easy.

This is the easiest way to install macOS Sierra on a PC computer. True, this method will be simple only for those who have hardware compatible for these purposes. Specifically, you must have a motherboard with the following chipsets: H61, B85, Z77, H77, Z87, H87, Z97, H97, Z170. The processor must be at least Intel Core i3. The video card must be compatible. For example, Intel HD 4000 / 4600, AMD 7850, 7870, Nvidia 640, 650, 660 and so on (Kepler) or Nvidia GT 210.

If you use Fermi video cards (GTX 5XX, 710, 720, 730), then most likely you will not succeed with the installation. These video cards are extremely unstable. I will say the following about Nvidia 730 video cards: this video card can be either Fermi or Kepler. So, if the video card is Kepler, then it will work fine with web drivers. GTX 9XX, 1XXX video cards work only with web drivers.

Attention! If you are using an NVidia graphics card, then masquerade as an iMac 13.1 or 14.2; other devices may have boot problems, since in most cases Apple uses AMD graphics cards.

Remember, the more compatible your hardware is, the easier the installation will be. If you don't have Intel processor Core, but there is, for example, Pentium or Celeron, then you will have to disguise yourself as an Intel Core, and if you have an AMD processor, you will have to use a patched kernel.

Previously I showed the installation using virtual machine with OS X installed from under Windows. Now we will install using the Boot Disk Utility (BDU) program, and will also try to use the standard config from Clover. Let the bootloader itself determine our hardware. I'll just add the kext to the network.

About installing macOS Sierra, you can ask your questions in the comments, but be sure to describe your computer configuration as fully as possible, for example, I will install it on this configuration:

• Gigabyte GA-Z87m-HD3
• Intel Core i3-4330
• 8 gigabytes of RAM (2 x 4 GB, 1600 MHz. Samsung)
• Intel HD 4600 + Gainward GTX 660 Ti
• 2 monitors (DVI + DVI), as well as a TV via HDMI.
• 120 GB SSD from SanDisk.

I also want to remind you that just in case you should have a flash drive with all the kexts and the operating room Windows system, in case something goes wrong and you have to download files or programs. Well, or use another device for this.

Boot Disk Utility runs on Windows. In my case, I will use Windows 10. We will also need an image with macOS Sierra.

Let's launch BDU and format the flash drive:

Immediately after formatting the flash drive, the latest Clover will be installed on it. And all we have to do is deploy our operating image onto a flash drive macOS system Sierra:

After we have written our image with the operating system to the flash card, I will upload the kext to the network. This is only needed for my computer and you may also need a kext, it all depends on your network card. By the way, when using BootDiskUtility, the FakeSMC kext is already in the kexts/other folder, so there is no need to insert it separately.

As soon as the flash card with macOS Sierra is written, we restart the computer and boot from our flash drive (F12). I will boot in UEFI mode. I will also specify the -v switch so that the operating system loads in text mode.

If you are using NVidia video card not Kepler, boot with the nv_disable=1 key. If your system freezes at boot, try booting with the -x switch (safe mode).

After selecting the language, we need to format our hard drive or SSD:

We continue installing macOS Sierra as usual:

After installing macOS Sierra, you need to fill out a lot of information:

All basic installation completed. As you can see, it worked for me out of the box on macOS Sierra GTX video card 660 Ti. Yes it is best video card of the ones I tried for Hackintosh. Looking ahead, here is a picture for you as a “seed”, though it’s El Capitan OS:

What to do after installing macOS Sierra?

After installing macOS Sierra, we will immediately install Clover on our SSD and configure config.plist, the config for each computer must be different, in particular the configs for Ivy Bridge / Haswel and laptops are very different, so it is recommended to read the khaki clover book and do experiments. If your system suddenly stops booting, you can always boot from a flash drive and fix config.plist.

I installed Clover with the following parameters:

You need to install the config on a hard drive, not a flash drive. Basically, if you have one, then Clover will select it by default. Also remember, the example config above is for UEFI systems, this Clover installation will not work for Bios Legacy.

After installing Clover, setting up config.plist and rebooting, we have a fully working system.

Briefly what I did in config.plist:

• installed 32MB of memory for Intel graphics in UEFI and registered ig-platform-id 0x04120004
• enabled P-states
• dropped extra SSDT tables, because of which SpeedStep did not work for me
• indicated iMac 14.2 model

Kexts that I used when installing and configuring Hackintosh:

• FakeSMC.kext
• RealtekRTL8111.kext - network
• HDMIAudio.kext - sound on TV

Everything else works out of the box. In addition to the sound motherboard. I didn’t turn it on on purpose, since I use sound on the TV. You can start sound using patched AppleHDA or VoodooHDA.

Remember, the more “correct” your Hackintosh hardware is, the easier the installation will be. Installing a hack on my computer is no more difficult than reinstalling Windows. But if you have specific hardware, for example PCI Wi-Fi adapter, sound card or something else, then in most cases these devices will not work with the hack.

That’s actually the entire installation of macOS Sierra on a regular PC computer.