How to distribute the Internet from your phone? Step-by-step instructions for Android, iOS, Windows Phone. How to distribute mobile Internet from a smartphone via Wi-Fi? Setting up an access point (Wi-Fi router) on a phone with Android OS

There are situations when you urgently need to connect to the Internet via a laptop, but a modem or open point There is no Wi-Fi nearby. Or someone from a group of friends urgently needs to check their email or messages social networks, and only one of all those present has 3G Internet. What to do in this situation?

It turns out that the solution to the problem is always at hand - a smartphone. Few people know how to distribute the Internet from phone to phone. Or how to create an access point for a laptop or tablet. But this function built into every smartphone.

How to distribute the Internet from phone to phone?

Regardless of what operating system the smartphones are based on - Android, iOS or Windows Mobile, - by digging into the gadget’s settings, you can easily create an access point.

One answer to the question: “How to distribute the Internet from phone to phone via Wi-Fi?” No. The creation and activation process varies depending on the version and type of operating system, but once you create an access point, repeating the procedure is quite simple.

Create a hotspot on iPhone

Apple smartphones are not only expensive gadgets with the most modern software, high-quality body and excellent front and rear camera. They are characterized by fast touch response and excellent application loading speed.

But now, if the smartphone has access to the network, then any user’s gadget will be able to connect to the Internet. To activate a function such as distributing the Internet from phone to phone, you will need to go to “Settings” and click on the “ tab Cellular connection" In this menu, you must activate the “Enable 3G” switch.

Next, in “Settings” you need to find the “Modem Mode” item and then activate it. The system will offer two options for operation: via Bluetooth or Wi-Fi. After selecting the appropriate mode, you will need to set a password for the access point. At this point, the network is activated, all that remains is to connect from another gadget.

Creating an access point on Android

Many users of smartphones based on the Android operating system do not even suspect that their smartphones or tablets have such a function as distributing the Internet from phone to phone. And you can do this without using additional programs and devices.

In order to activate the Wi-Fi point on your smartphone, you need to enter the “Options” menu. In the Wireless and Networks group, you will need to select More, which will open additional settings.

After this, the smartphone owner will have to configure the access point by going to “Modem Mode”. Here you need to check the box next to “Portable Wi-Fi hotspot”. Next, after going to the “Set up Wi-Fi hotspot” menu, the user will be asked to set the network name and password for it.

Please remember that you should only share your password with people you know. After new data has been entered, it must be saved. Then, returning to the “Wireless Tools and Networks” menu, you will need to activate “Wi-Fi Direct”. This will turn on the dispenser. And the last step is to connect your smartphone to the mobile Internet.

Creating a hotspot on Windows Mobile

In smartphones running on Windows based Mobile, in order to understand how to distribute the Internet to MTS from your phone, you must first open the “Quick Actions” panel. Next, you will need to select the “Mobile hotspot” tile. It is worth noting that to call up the settings you need a long tap or a long touch; a short click only activates the access point.

In the menu that appears, you need to scroll the list of settings to the very bottom and select the data editing icon. A short click on the “Pencil” icon will allow you to change the name of the access point and password for it. After making changes, you need to click on the “bird” - the confirmation and save icon.

In order to activate such a function as distributing Internet from your phone to Beeline and other mobile networks after changing the settings, you should open the “Quick Actions” panel again and turn on “Mobile Hotspot” with a short tap.

Experts advise setting a combination of numbers and letters as a password for an access point activated on a smartphone. different languages and registry. This precaution will not allow random passers-by to connect to Wi-Fi from someone else's phone.

The need to distribute the Internet from a smartphone to other devices arises quite often, especially in those regions where there is 3G, 4G (LTE) coverage, but wired connection absent. For example, you went to a dacha where providers will not lay out cables any time soon, but you need to connect to the network today. In this case, you can connect your laptop to the Internet via a smartphone, especially if your tariff plan allows you not to worry too much about the volume of traffic.

There are several ways to connect a smartphone and laptop to access the network: using a USB cable, via Bluetooth or Wi-Fi. The last method is suitable for any combination of connected devices, and we will analyze the first two using the example of connecting to a computer under Windows control.

How to distribute the Internet via Wi-Fi

This is one of the easiest to set up options for distributing the Internet from an Android device. It consists of using a smartphone as wireless router, which may be useful if you need to connect several devices to the Internet at once, for example a computer and a tablet.

To switch your smartphone to Wi-Fi modem mode, open Android settings and in the wireless networks section, tap on the “More” item. Then go to the “Modem Mode” window and tap “Point Wi-Fi access».

A new Wi-Fi Hotspot window will open. First of all, activate the Wi-Fi tethering using the switch at the top. After that, in the access point settings, set the security method (WPA2 PSK recommended) and password.

This way you can connect not only a computer, but also any device that has Wi-Fi module. The main thing is to make sure that you have it turned on wireless interface. On the list available networks should appear new network with the name you specified. Click on it, enter the password and click the “Next” button.

How to connect a smartphone as a USB modem

To implement this method, you need to connect your smartphone with a cable to one of the USB ports on a computer running Windows. In most cases necessary drivers the system will detect and install it on its own, but if this does not happen, you will have to download them from the gadget manufacturer’s website and install them manually. Please note that it is best to use the supplied cable, as its quality may indirectly affect the connection speed.

After connecting your smartphone, open its settings and in the “Wireless networks” section, select “More”. A section will open in front of you additional settings, where we are interested in the “Modem mode” item.

Here you need to check the box next to the “USB modem” item. As a result, a new connection will appear on your computer. To activate it, open a window network connections, right-click on the “Connect via local network" and in the appeared context menu select "Enable".

How to connect a smartphone as a Bluetooth modem

To create this connection, you need to open the smartphone settings in exactly the same way as described in the previous section and go to selecting the modem mode, which is located at “Settings” - “More…” - “Modem mode”. Only this time you need to check the “Bluetooth modem” box. Please note that your gadget must be visible to other devices. Be sure to check this option in Bluetooth settings smartphone.

Don't forget to make sure that Bluetooth is active in Windows. Open the “Devices and Printers” window in the “Control Panel”, in which we click on the “Add a device” link. The search for devices available in at the moment to connect via Bluetooth. When your phone is detected, its icon will appear in this window. Click on it and a window with an 8-digit code will appear. After this, your phone will ask you to pair the devices, and then ask you to give permission to use your smartphone as a Bluetooth modem.

After completing these operations, right-click on the smartphone icon in the “Devices and Printers” window and select “Connect via” - “Access Point” from the context menu.

In the process of writing this article, we tested the data transfer speed for each connection method using the Speedtest service. As a result, it is the connection with using Wi-Fi showed the most better speed, USB came in second, with Bluetooth falling behind by a wide margin. Therefore, if you have an outlet in close proximity, then you need to use the Wi-Fi modem method. But if you are in the field, where there is not even electricity, then you should choose a USB connection as the most energy efficient.

Have you ever used a smartphone under Android control for distributing the Internet to a computer or laptop? Which of the available options is the most preferable, in your opinion?

Now almost everyone modern man There is touch smartphone or a tablet is already a common necessity, and not a way to emphasize your style. There are situations when a friend asks you to distribute the Internet via a tablet, and you, racking your brains, cannot understand what he is talking about.

If you have encountered such a problem - this issue There are simple solutions. The article will discuss the main methods of distributing the Internet through a device, as well as standard methods access to world wide web.

3G connection

A popular connection method is mobile network 3G, which offers many advantages over Wi-Fi connection, such as:

Almost unlimited operating radius
No connection to a specific place.

However, there is one big disadvantage - this low speed, but technologies do not stand still, but develop, and the LTE standard has been in practice for a long time.

Quick instructions

To configure the connection you need to do:

Go to the device settings, in the “More” submenu
In the window, click on “Mobile network”
Check the box for network data transfer
Select the "Access Points" option
Via the menu - create new point(sample)
Fill in the appropriate fields.

3G operator data

The table above shows the information that needs to be entered in the appropriate fields. Please note that you can also use the official website of the operator; in both cases, you must enter the data carefully and, if possible, check each character to avoid errors.

After entering and saving the template, reboot the device for all changes to take effect.

Notification panel

After the touch tablet turns on, call up the notification panel (see above). We find a shortcut like “Mobile data” or “ Mobile traffic"- click on it to connect to the 3G network. This item is required, and after use, turn it off so that traffic does not decrease and the battery does not run out.

It’s important to know - just like on a smartphone, you can order automatic settings, which will come in the form of a message that will need to be saved; But this method used only when the gadget supports calls and SMS.

External 3G modem

If your tablet is not equipped with a 3G module, then in most cases you will be able to connect external devices through OTG cable, which ensures work in host mode. Practically at work external modem and built-in 3G there are no differences, only additional costs of money and time for setup.

Since the Android operating system is built on Linux, it has some operating features that are fundamentally different from Windows, for which almost all modems are designed.

First, download the application – 3G Mode Switcher.

Modem program

This program will help change the operating mode of the modem, since the Android operating system identifies the modem as regular storage, and this does not correspond to the primary goals. Therefore, we remove the SIM card from the modem, connect it to the computer, launch the application and click “Modem only”, after a short period of time we disconnect it and connect it to the tablet. And then, as described above, we adjust the point.

In addition, if an error occurs during the change process, you can always return it to the factory state by clicking on the “Additional functions” button.

Portable point - tablet

As mentioned above, let’s learn how to set up a tablet for Internet distribution. Please note that without active Internet On the device itself, this method will not be possible.

Tablet as an access point

The image shows the step-by-step setup of the gadget for distributing Internet resources.

Connect via Wi-Fi

This method is the easiest to maintain and configure, as it does not require any deep knowledge electronic gadgets from the owner.

We go into the device settings, immediately look at “Wireless Networks”, where we find the “Wi-fi” sub-item. We change the position of the indicator to the “On” mode, then go to the adjacent window and select one of the given points. By clicking on it, we confirm the choice, enter the password, if necessary, and wait. After authentication, the device will receive network IP address to access the World Wide Web.

Wi-Fi 3G connection

A completely new approach to accessing World Wide Web resources.

Small device for 3G-Internet

The image shows small device, which works using technology, received 3G and transmitted it further via Wi-Fi. That is, to make it clearer: this gadget is inserted regular SIM card with the Internet already configured, then via Wi-fi it is distributed to other devices. Everything is very simple, and most importantly - understandable and convenient. By putting such a device in the pocket of your jacket or bag, you will always stay in touch with friends and family. Connecting to such a portable point is the same as described in the upper paragraph.

In addition, it is very convenient when the tablet does not have built-in 3G.

There is also a minus - limited battery life, up to a maximum of 2-3 hours, if you constantly change modes. The way out of this situation can be a portable, compact battery, which can be bought at an online store.

Internet via Bluetooth

Go to the gadget settings menu, select the “More” option, in the next window “Modem mode”, see below.

Creating a portable modem

In the window, see below, the user can choose one of the options for creating his own point, for example:

Via Bluetooth
Via Wi-Fi, as described above.

Bluetooth modem

Select the last option - check the box and return to the main window.

Pairing devices

Now click on the “Bluetooth” option, be sure to change the position of the indicator to on, and begin pairing with another tablet or smartphone. After which one gadget distributes, the other receives.

Laptop as an access point

We discussed above how to make a tablet device a portable point, but any desktop computer can also be configured for distributing Internet resources. First you need to decide: a desktop computer or a laptop. If it’s stationary, then we skip it. this step and move on to the next one (then we’ll come back), if it’s a laptop, then we follow the instructions.

Download the Connectify program on your PC, after installation we proceed to the settings:

Leave the standard point name
Enter the created password
Select yours from the list network card(wireless card)
Let's leave Wi-Fi
Selecting protected mode
Click the “Start” button.

Main window

That’s it, now your laptop distributes the Internet on its own if you don’t have a router.

Desktop computer

External receiver

If you have a regular PC with system unit, and there is no router, then you will need such a small Wi-Fi adapter (it can be with or without an antenna, at your discretion). Install drivers on it and configure the point, as described in the previous paragraph. If available standard program from the manufacturer - makes your work easier. Connecting to self-created points is very simple, just like a regular router, entering a password, and in the end you get network address to access the Internet.

Connecting the tablet to the Internet

Today, it is difficult to set up Internet distribution via Wi-Fi from a tablet. experienced user should not arise. To do this, you just need to turn on the Internet connection on your tablet, and then make the gadget an access point.

How to connect to the Internet on your tablet

First of all, you need to remember that with this method of organizing connections, connecting the tablet to another WiFi networks will not work with the Internet. Thus, it is necessary that the tablet has a suitable SIM card slot, which will allow you to set up a connection to the mobile Internet of the telecom operator. Another way is to use an external USB modem that can connect to 2G or 3G networks. In this case, you will need to find out the mobile Internet settings from your operator, and then activate data transfer in the settings menu. This function may be called differently depending on the tablet model, but most often this menu item is called “Mobile networks”.

We start distributing the Internet via WiFi

On at this stage we need to turn our mobile device V WiFi modem. First of all, activate it in the menu Wi-Fi settings. Next, the settings we need are hidden in the “Data transfer” item. There you need to tap on “More”, and then enter “Modem Mode” by clicking on this inscription.

At the next stage, select the “Wi-Fi access point” sub-item.

By moving the slider on the line “Wi-Fi access point” to the “on” position, we activate the modem mode.

So, the modem mode is active, now the finishing touch remains - setting up the access point. You need to go to the settings section "Wi-Fi access point settings". A window will appear on the screen where you should enter the name of the wireless network (the "Name" field network SSID") at your own discretion, using the Latin alphabet. In the second field "Password" you need to set a network access password, by entering which you can use the Internet on the connected device. This password should not be shared with your neighbors, since in this case they will easily be able to use your Internet connection.

Every tablet owner has thought about how to turn the device into a kind of modem, distributing the Internet from it to other devices - a smartphone, laptop, PC, etc. Let's say right away - this is quite possible. Moreover, such a procedure will not seem complicated to a skilled user. However, it will be useful for everyone to know a few nuances. Therefore, we will tell you in as much detail as possible about how to distribute the Internet from a tablet.

How to distribute the Internet via Wi-Fi?

The first step is to make a wireless access point from your tablet. Then it will be possible to connect other devices to it, which will then be able to access the Internet. How to do this? Let's look at everything point by point:

You will need the tablet itself, equipped with a SIM card. In addition, the device must contain a configured connection to the mobile Internet (3g, 4g) through any telecom operator (MTS, Beeline, Yota, Megafon, etc.) If the tablet is simply connected to another Wi-Fi point, then make it a gadget access point will be quite difficult.
Then you need to go to settings. In the “Wireless Networks” section, click on the “More” button. On most versions of Android it is located just below the “Wi-Fi”, “Bluetooth”, “Traffic Management” items. In other interfaces you will not find the “More” button. Instead - “Advanced settings”.
As soon as you click on “More” (or “Advanced settings”) it will open special menu. Next, you need to select “Modem Mode”.
Tap Hotspot. Another window will open, where at the very top you can activate the Wi-Fi modem. To do this, move the switch to the right. Most likely, the tablet will “think” for a few seconds. After which he may ask you to turn off Wi-Fi. Some models similar devices cannot simultaneously distribute the Internet and be connected to the World Wide Web via wireless communication.
Now you need to go to “Access Point Settings”. Here you can change the name of the network to make it easier to find it from a computer, smartphone or other device that has a Wi-Fi module. Next, it is advisable to set a password. You will enter it when connecting to the tablet, which has now, in fact, become a wireless router. You don't have to set a password. It is enough to select “no” in the “Security” window. However, if you plan to use it for a long time tablet computer as a modem, it’s worth protecting your password from your neighbors, who can take advantage of the free Internet and connect to the access point without any problems. Just remember that the security key must be about 8 or more characters. Also in this section you can limit the number of users who can connect to the network. Once you have configured all the fields, click the “Save” button.
Now you can easily connect to the tablet, which has begun to perform the functions wireless point Internet access. All you need to do is run Wi-Fi on your smartphone, laptop or personal computer. In the list you will see a new network with a set name. Click on it, click “Connect” and enter the password (if, of course, you set a security key).
If you did everything correctly, then most likely, when you connect, a window will appear where you will need to select a network location. There will be three points - home network, enterprise network and public network. Choose any one.
Go to your browser and check your connection to the World Wide Web.
Now you have configured everything through the tablet wireless access to the Internet for another device.

By the way, on some models of tablet devices (Asus, Lenovo, Samsung, etc.) the function of auto-turning off the access point after some time is activated from the factory. For example, if the wireless network is not used for 5-10 minutes, the tablet stops working in modem mode. As a result, you have to reconfigure the device and connect to a new network. Therefore, in the “WLAN Access Point” section, find the “Auto-shutdown” item. Then set the switch to the "always on" position.

Remember that when the tablet distributes Wi-Fi, it discharges much faster. Therefore, it is advisable to reduce the screen brightness to a minimum, disable energy-consuming applications, or even put the device on charge.

You can distribute the Internet from a tablet to a phone, PC or laptop in other ways. Not only with the help creating Wi-Fi points, but also via a USB cable. What needs to be done for this?

We connect the tablet to the Internet. It is possible via 3g or 4g, as well as via Wi-Fi.
Then you will need to connect the tablet to your computer or laptop via a USB cable.
Next stage– go to “Settings”. Then - “Wireless networks” - “More” - “Modem mode”. Essentially the same path as when setting up Internet distribution via Wi-Fi. Only now instead top line“Access point” we are interested in the line “USB modem”. Here you need to check a box or activate a switch.
Now a new connection will appear on your computer or laptop. To make it active, open the Network Connections window. Then right-click on the corresponding icon. Then select “Enable” in the menu that appears.
If you have a modern OS, then the system will install all the necessary drivers on its own. Otherwise, you will have to go to the tablet manufacturer’s website and download there necessary software.
You have now activated the device as a USB modem. Through the appropriate cable, the tablet can distribute the Internet.

The connection speed with this connection method is lower than with Wi-Fi distribution. Much depends on the quality of the cable. Therefore, we recommend using good cord. Preferably the one that came with the tablet.

Let's move on. It is possible to connect the tablet as a Bluetooth modem. To do this, you need to do most of the points that we talked about above (via Wi-Fi and USB). We also go to “Settings” - “More” - “Modem mode”. Only this time you need to check the box next to “Bluetooth modem”.

Next, you need to ensure the pairing of the two devices. In addition, you need to enable the detection function on both the tablet and the Internet receiving device. We are waiting for the “Bluetooth Pairing Request” window to appear. It must be confirmed both on the smartphone/PC/laptop and on the source of the Internet connection (tablet).

After all of the above, we recommend running (most likely, you will have to download it in advance) the BlueVPN program. This utility helps create faster and more reliable Internet transmission via bluetooth. If for some reason there is no connection, then in the “Devices and Printers” section, right-click on the tablet icon, and then confirm the “Connect via” - “Access Point” item.

However, remember that Bluetooth has decent transmission speed limits. You shouldn't expect comfortable web surfing. Not to mention watching movies online. At most, this speed is enough to perform “everyman” tasks - checking email, communicating in instant messengers, etc.

www.OrgTech.info

How to distribute the Internet using Wi-Fi from an Android tablet/phone.

Many people perceive Android devices only as Wi-Fi client networks, i.e. a device that uses a wireless network to access the Internet. But in fact, any Android device can be made into active equipment, a mini-router (mini-router because the number of clients is usually limited to 5), capable of “distributing” the Internet (if there is a 3G\4G module on the Android device) or simply combining devices into a network. To do this it is not necessary to install additional applications, you can get by with the built-in tools. In this article I will describe step by step how to distribute Wi-Fi Internet using an Android tablet or smartphone.

It is worth noting that the screenshots below will differ from what you see on your smartphone or tablet, but most of the steps are identical, so once you get the gist, you can easily set up Internet distribution on any Android gadget.

First of all, you need to insert a SIM card into your tablet/smartphone and set up the Internet (to set up the Internet, I recommend contacting your operator so that they can provide you with the necessary settings). After the Internet is working, you can start setting up its distribution via Wi-Fi. To do this, press the Main Menu button on your tablet/smartphone.

Find and click the "Settings" button.

In the Wireless Networks field, click "More" - "Modem Mode".

Switch the slider in the Wi-Fi access point field to the “On” position.

Now that it's on Wi-Fi distribution you need to configure access to the created access point; to do this, click “Configure access point”.

If you wish, change the Wi-Fi network name (SSID), security (I recommend leaving the default WPA2PSK) and specify a password to connect to your Android device, I recommend using complex password consisting of at least 8 characters with in capital letters, numbers and special characters (@#$&%). Finally, click "Save".

Now your device distributes the Internet, then you need to connect to it, in this example I will connect from a laptop with the Windows 7 operating system. In the notification area located on the right edge of the taskbar, find wifi icon and click on it. A list of all will appear visible Wi-Fi networks, find the previously created one, select it and click the "Connect" button.

After that, enter the password specified in your Android tablet/smartphone and click “OK”.

After this, you will be connected to your Android device. Now you can access the Internet on your laptop via your tablet/smartphone.

pk-help.com

How to distribute Wi-Fi from a tablet

Nowadays, it is very difficult to imagine a phone or tablet that does not have access to modern wireless networks, which make it possible to use the most high-speed Internet. If you want to organize an access point for several more from your device, then this is quite possible: you can connect from a laptop, from a phone, and from anything - if only there was a Wi-Fi module and the ability to connect to the network. Today we will talk about how to distribute Wi-Fi from a tablet.

We will first consider devices with the Android operating system, since they are the most common. On other platforms, this function is more relevant for mobile phones.

It is only at first glance that it seems that setting up distribution is something overwhelming; in fact, you don’t need to download third-party software or radically change settings for fear of “bricking” your favorite device.

So, we picked up our tablet and the first thing to do is to find “Settings”, and then click on them, going inside. Here we are interested in the “More” item.

How to distribute Wi-Fi from Android: Video

How to distribute Wi-Fi from Android

How to distribute Wi-Fi from a laptop on Android

How to easily share Wi-Fi in Windows 7 using Conectify Hotspot

Setting up a Wi-Fi hotspot on Android

bezprovodoff.com

How to distribute Wi-Fi from a laptop, phone or tablet?

Wireless Internet completely and completely captured our carefree life. Any device, be it a phone, tablet or laptop, without access to the World Wide Web is an ordinary piece of hardware. But there are much more people who have all kinds of gadgets than those who pay for the Internet (read how to find out the speed of your Internet connection). Therefore, situations arise when in a friends’ campaign one lucky person has unlimited access, and everyone else is not averse to using it. This is where the need arises to create a so-called access point.

We distribute the Internet from a laptop (method 1)

You can distribute Wi-Fi from a laptop using standard operating tools Windows systems 7 or Windows 8. The main thing is that the computer has a wireless adapter. It is usually built into the case, but USB adapters are also commercially available. For example, like this one.

1. So, right-click on the computer icon in the taskbar and go to the Network and Sharing Center.

2. In the window that opens, click Set up a new connection or network.

4. Just get acquainted with the next window and click Next.

5. Now you need to specify the name of the new network - any name you want. Security type - leave the default WPA2-Personal. A security key is a kind of password to access your network - it is advisable to use letters and numbers. Also check the box - Save settings for this network. Click Next.

6. The creation of the new network is complete, now you need to enable and configure sharing. To do this, go to the Network and Sharing Center.

7. Click Change additional options public access.

8. In the window that opens, make the settings as in the screenshot below and click Save changes.

That's all. Now your laptop can distribute the Internet, and friends can connect to it from their phone or tablet.

We distribute the Internet from a laptop (method 2)

If for some reason you were unable to distribute the Internet using the first method, then try the next method. In my opinion, it is simpler and more effective. You will need to download a small Maryfi program from here - this is a direct link. Next, run the installer - installation will take 1-2 minutes - and open the program.

A small window will open at the bottom right.

Everything here is simply outrageous. Come up with and enter a network name (Wi-Fi Name), password (Password) and click Start Hotspot. After a few seconds, the network will work and appear in network connections.

Everything worked for me right away. If you have any problems, try right-clicking on this connection and selecting Properties.

On the Access tab, make the settings as in the screenshot.

We distribute the Internet from a phone or tablet

The vast majority of phones and tablets have an operating system Android system(here we learn how to install a torrent client on Android), so I decided to make the instructions for both devices common. I’ll say right away that you can only distribute the Internet if you use mobile internet(3G, 4G(LTE), GPRS, etc.). If you connect to the Internet via Wi-Fi, then, alas, you will not be able to distribute such Internet.

So, I will show you how this is done using the example of a tablet. ASUS.

1. Turn on the tablet and go to the main menu.

2. In the menu, find the Settings item and, in fact, go there.

3. On the top left there will be settings for wireless networks. We need the More item - click on it. Then select Modem Mode.

4. In the menu that appears, click Access Point Settings.

5. A pop-up window will appear where you need to specify the connection settings.

Network name (SSID) - the name of your connection. You can call it whatever you want.

Security - leave the default WPA2 PSK.

Password - create a complex password.

6. And lastly, check the box next to Wi-Fi access point.

If you did everything correctly, then in the left top corner The following icon will appear on the screen, and your device will begin distributing the Internet via Wi-Fi.

Tags: android, wi-fi, Windows 7, windows 8, local networks, laptop, tablet

myfirstcomp.ru

How to distribute Internet from Android to a computer or tablet

How to distribute the Internet from Android to a computer or tablet. The need to distribute the Internet from a smartphone to other devices arises quite often, especially in those regions where there is 3G, 4G (LTE) coverage, but there is no wired connection. For example, you went to a dacha where providers will not lay out cables any time soon, but you need to connect to the network today. In this case, you can connect your laptop to the Internet via a smartphone, especially if your tariff plan allows you not to worry too much about the amount of traffic.

How to distribute the Internet via Wi-Fi

This is one of the easiest to set up options for distributing the Internet from an Android device. It involves using your smartphone as a wireless router, which can be useful if you need to connect several devices to the Internet at once, such as a computer and a tablet.

To switch your smartphone to Wi-Fi modem mode, open the Android settings and in the wireless networks section, tap on the “More” item. Then go to the “Tethering Mode” window and tap “Wi-Fi Hotspot”.

This way you can connect not only a computer, but also any device that has a Wi-Fi module. The main thing is to make sure that your wireless interface is turned on. A new network with the name you specified should appear in the list of available networks. Click on it, enter the password and click the “Next” button.

How to connect a smartphone as a USB modem

To implement this method, you need to connect your smartphone with a cable to one of the USB ports on a computer running Windows. In most cases, the system will detect and install the necessary drivers on its own, but if this does not happen, you will have to download them from the gadget manufacturer’s website and install them manually. Please note that it is best to use the supplied cable, as its quality may indirectly affect the connection speed.

After connecting your smartphone, open its settings and in the “Wireless networks” section, select “More”. A section of additional settings will open in front of you, where we are interested in the “Modem mode” item.

Here you need to check the box next to the “USB modem” item. As a result, a new connection will appear on your computer. To activate it, open the network connections window, right-click on the “Local Area Connection” icon and select “Enable” in the context menu that appears.

How to connect a smartphone as a Bluetooth modem

Don't forget to make sure that Bluetooth is active in Windows. Open the “Devices and Printers” window in the “Control Panel”, in which we click on the “Add a device” link. It will begin searching for devices currently available for connection via Bluetooth. When your phone is detected, its icon will appear in this window. Click on it and a window with an 8-digit code will appear. After this, your phone will ask you to pair the devices, and then ask you to give permission to use your smartphone as a Bluetooth modem.

After completing these operations, right-click on the smartphone icon in the “Devices and Printers” window and select “Connect via” - “Access Point” from the context menu.

In the process of writing this article, we tested the data transfer speed for each connection method using the Speedtest service. As a result, it was the Wi-Fi connection that showed the best speed, USB came in second place, and Bluetooth lagged behind by a wide margin. Therefore, if you have an outlet in close proximity, then you need to use the Wi-Fi modem method. But if you are in the field, where there is not even electricity, then you should choose a USB connection as the most energy efficient.

Have you ever used a smartphone running Android to distribute the Internet to a computer or laptop? Which of the available options is the most preferable, in your opinion?