How to completely disable Windows Defender. How to disable Windows Defender

The built-in Windows Defender utility protects your PC from viruses and malware that can be “picked up” on the Internet when downloading files or connecting other users’ flash cards to the device. If you are completely satisfied with your work antivirus program, then you need to know how to disable Windows 10 Defender permanently. This is written about in this article.

Disable and enable

Using the Settings app

Good to know! The built-in protection will turn off for a while (approximately 15 minutes). After this, the system will automatically start Windows Defender.

In the Local Group Policy Editor

After this, any attempt to launch the built-in defender will display an error.

Good to know! If you set the parameter to “Not configured”, it will begin to function normally.

In the Registry Editor

Important! If you don't find this setting in the registry, create it yourself: RMB on the “Windows Defender” folder → create → DWORD value (32 bits) → enter the name “DisableAntiSpyware” → set its value to “1”.

If you decide to run Defender again, set the setting to "0" in the Registry Editor.

Video

The video shows in detail how to completely disable Windows Defender using the Group Registry local policies and Registry Editor.

Third party programs

Besides standard means You can disable the built-in defender using special free programs.

The program was originally developed to disable the function of updates that are performed in automatic mode. But it “can do” much more: it turns the OS defender on and off, and has a Russified interface.

The utility disables tracking in the OS. But when using the advanced configuration mode, the item is available shutdown Win dows defender.

Activation

To activate Defender in Windows 10, you do not need to perform any action - click on the message that is located in the notification center and the system will do everything automatically.

If you deactivated Windows Defender using the Registry Editor or the Local Group Policy Editor, then repeat the same steps as when disabling it, just run Internal Defender.

Making exceptions

Conclusion

Windows Defender protects your computer from viruses and malware. If necessary, you can disable or enable it, and also configure it by adding it to the list of exceptions necessary files, folders and programs.

Most users are distrustful of the built-in services that Microsoft offers. After Windows release 10, the query “how to remove Windows 10 Defender” has increasingly started to be typed into search lines. In this article we will take a closer look this question and is it necessary to do this?

What is Windows 10 Defender and why is it needed?

Windows Defender is a built-in antivirus system, it was back in 7, and still does an excellent job of its functions. However, in our country they always blame antiviruses for everything and don’t even realize that the system already has its own protection. Why is this all happening? The fact is that this defender also needs updates, like any other antivirus programs. He gets them from standard packages Windows Update. This is where the whole problem lies - the majority of users in our country use pirated Windows version, they immediately remove the service Windows updates. This is a completely natural fact, through certain time antivirus signatures become outdated and it stops recognizing modern viruses.

Glary Utilites - download uninstaller

Conclusion: if on your personal computer If a licensed OS is installed, then the decision to remove the defender will be meaningless. Especially if you decide to replace it with free Avast or pirated versions NOD or Kaspersky. If a pirated OS is installed on your PC, you will need to remove the protector.

Is it possible to remove Defender in Windows 10 and how to do it?

Windows Defender cannot be removed, but it is disabled. In many cases, it turns off on its own when you download an antivirus program to your computer, but if this does not happen and you decide to get rid of Windows Defender, then this procedure is done as follows:

How to remove Navitel from Android phone fully

Such a sequence will not be able to remove the protector, but your computer will forget about it forever.

xn----7sbbpvhbl8df8h.xn--p1ai

How to remove Windows 10 Defender

In this article I will tell you how to remove Defender in Windows 10. latest versions Windows operating systems have their own antivirus built in, which is called “Windows Defender” or, in the Russian version of the OS, “Windows Defender”. The application is undoubtedly useful and quite pleasant (minimalistic, unobtrusive and consumes relatively few resources). However, some users do not need it: some are absolutely confident in their actions and do not use an antivirus, others have licenses for other software that protects against malware. Therefore, for a certain circle of people, the issue of uninstalling Windows 10 Defender is relevant.

How to remove Windows Defender and is it even possible to do it?

Disabling Windows Defender in Settings

Windows Defender is not separate application, which you can just take and delete. The corresponding utility is part operating system.

However, Windows Defender can be disabled. After this is done, the utility will stop working and, as a result, it will not create any load on the processor, RAM And hard drive.

How to disable Windows Defender

Disabling Windows Defender is quite simple. To do this you will need:

1. Go to the start menu and find the “Settings” item;
2. In the window that opens, select the “Update and Security” category;
3. Go to the “Widows Defender” tab;
4. Find the “Real-time protection” block and move the switch to the “Off” position;
5. Close the Options window.

After this, Windows Defender will stop working. However, there is one problem - after restarting the computer, the utility will function again. Some, in turn, want to remove the Windows Defender utility once and for all.

Disabling Windows Defender forever is a more difficult task. To solve it, you will need to go into the “Local Group Policy Editor” and the registry.

Group Policy Editor Windows 10

To prevent Windows Defender from starting, first of all, you will need to do the following:

1. Run the Win+R key combination and enter in the window that opens: gpedit.msc;
2. By pressing Enter, a window will open in which you will need to go to the following path: “Computer Configuration” - “Administrative Templates” - “ Windows components» – “Endpoint Protection” – “Disable Endpoint Protection”;
3. After following the specified path, you will need to find the “Turn off Endpoint Protection” item;
4. You should right-click on it and click on “Change” in the pop-up menu.
5. Then all that remains is to move the switch to the “Enabled” position and apply the configuration.

After this is done, an error will appear when you try to launch Windows Defender.

Disabling Windows Defender through the registry

That's basically it - Windows Defender will no longer work. But to get rid of the error you will need to perform some more steps:

1. Run the key combination Win+R;
2. In the window that appears, follow the path: HKEY_LOCAL_MACHINE – SOFTWARE – Policies – Microsoft – Windows Defender;
3. After clicking on the last item in the list, DisableAntiSpyware will appear on the right side of the window;
4. You should right-click on it, then click on “Change” and set “1” as the value.

That’s it, after these steps you can forever forget about the existence of the Windows Defender utility. After these steps, we can say that we have removed the defender on Windows 10.

lifehacki.ru

Uninstalling Defender in Windows 10

It just so happens that many users are skeptical about the built-in services offered by Microsoft. And now, after the release of the “top ten”, the query is increasingly flashing in the search lines: how to remove Windows 10 Defender? In this article we will try to figure out whether it is worth doing this and, if so, how.

What is it and why is it needed?

Windows Defender is a built-in antivirus system, which appeared in Windows 7 and still protects the computers of many users around the world quite well. Unfortunately, in our country it is extremely popular to swear about which antivirus is better, and no one remembers that the system already has such protection by default. Why is everything happening like this?

The fact is that, like any other antivirus, Defender needs regular updates, which he receives along with standard Windows packages Update. This is where the problem lies - the majority of Windows users in our country are pirates, using unlicensed software and trying to remove the Windows update service. It is quite natural that after some time Defender’s signatures become outdated and it ceases to recognize more or less modern viruses.

Conclusion: if you are a user of a licensed OS, then trying to remove this service is pointless, especially if you change it to some free Avast or a pirated copy of Kaspersky or ESET. If you only use a pirated version, then we suggest you move on to the second point, in which we will solve the question of how you can remove Windows Defender.

Is it possible to remove it and how?

Roughly speaking, Windows Defender cannot be removed, but it can be disabled. In most cases, it turns off on its own when a “competitor” appears on the computer, however, if this does not happen or you decide to remain completely without protection, then you can disable the protection service as follows:

1. Press Win+X and select “Run”;
2. Enter the line gpedit.msc and click OK;
3. Go to the folder: “Computer Configuration” - “Administrative Templates” - “Windows Components” - “Endpoint Protection” - “Real-time Protection”;
4. Double-click “Turn off real-time protection”;

1. In the window that appears, set the switch to the “Enabled” position and click OK;

This sequence will not remove Windows Defender, but it will make your computer forget about it forever (or until you get everything back).

windows10x.ru

How to disable built-in antivirus in Windows 10

Greetings, dear readers of my blog. I hope each of you knows that after upgrading your PC to operating Windows systems 10, Windows Defender is also installed with it. This is an antivirus program created by Microsoft. It is installed in the OS by default and can provide users with good protection from various spyware and viruses.

It should also be mentioned here that, according to the results of recently conducted tests, such an antivirus program received a very useful additions and stood a head taller previous versions. But the overwhelming majority of users very often have some problems with uninstalling this antivirus. Therefore, my article will be devoted to the topic: “How to disable the built-in antivirus in Windows 10.”

A few words about Windows 10 protection

Before moving on to step by step instructions on removing the built-in antivirus, first of all I want to write a few words about protecting the new tenth version of Windows.

Security in the OS consists of three main elements that work very well together:

• Firewall or Firewall. This software is designed to provide high-quality protection for your PC from threats that can enter via the Internet.
• Browser Microsoft Edge. The program is equipped with the function of passing the authentication procedure, modern technology Certificate Reputation. Considered one of the most secure browsers to date.
• Windows Defender 10. Designed to serve as the main antivirus program on your computer.

Windows Defender (how to disable >>>) is equipped with a huge set of modules from the manufacturer, each of which performs a specific job (controlling any changes, eliminating malicious components, and much more).

Windows Defender has the following additional features:

• Monitors autostart.
• Controls correct order OS updates.
• Controls the operation of drivers.
• Provides high-quality monitoring of security settings.
• Regulates the operation of files.
• Keeps an eye on proper work all services.

The process of disabling an antivirus program

• Turn on your computer, find “Control Panel” using Windows search:

• Under the inscription: “Configure PC settings”, find the “Windows Defender” menu item and click on it. The main menu of the program will open:

IMPORTANT: If, after opening the “Windows Defender” tab, the following message appears on the screen: “Application is disabled,” check your PC for third-party antivirus programs (as they may have made exceptions in the operation of this software).

Disable in antivirus settings

• Go to the “Options” menu item:

• On the right (when a new window opens) find the "Real-time protection" section and move the slider to the left (so that "On" changes to "Off"):

As you can see, everything is very simple and accessible.

But when carrying out such actions, there is one caveat - most often, after 15 - 20 minutes of computer operation, all saved parameters will be lost and you will have to configure the settings again.

Disable in the Local Group Policy Editor

• Use the combination Windows keys+ R. In the Run window, enter the following command: “gpedit.msc”. Click OK:

• In the window that opens, on the left you will see a huge list of folders. In it, find the inscription: “Administrative Templates”, then “Windows Components” and at the very end - “Endpoint Protection”. On the right, find the “Turn off protection...” option:

• A new window will open in front of you. On the left side, select “Enabled” and click “OK”:

As a result, you may notice a notification from your computer that Defender has stopped working on the system.

Disabling using Registry Editor

• Log in to the Registry Editor. To do this, simultaneously hold down the “Win ​​+ R” keys and enter the command: regedit

• Carefully re-read the sections that appear and find “HKEY_LOCAL_MACHINE\………\Windows Defender” there:

• Create new parameter(DWORD) under the name “DisableAntiSpyware”.
• Give an alternative option by changing its settings (use 1 to disable the application, 0 to enable it).

These are the three main methods I wanted to describe to you in detail. After completing all these steps, the antivirus will only bother you with a message about its deactivation. Even if the shutdown did not occur, I advise you to use the services of some software products.

We use free software

Another good way to get rid of Windows Defender forever - use the Destroy Windows 10 Spying program. This utility in their own way functionality is very similar to the previous one. When you activate the extended operating mode (which can be turned on directly in the settings), you can easily disable the standard one Windows antivirus 10.

I really don’t want to say goodbye, but this is the end of my article. In gratitude for your subscription, I will delight you with more new, interesting and useful materials.

Best regards, Victor!

it-tehnik.ru

How to disable Windows 10 Defender forever: settings, adding exceptions, how to enable

The built-in Windows Defender utility protects your PC from viruses and malware that can be “picked up” on the Internet when downloading files or connecting other users’ flash cards to the device. If you are completely satisfied with the performance of your antivirus program, then you need to know how to disable Windows 10 Defender permanently. This is written about in this article.

Disable and enable

Enabling and disabling the defender is performed in the same sequence (also read “Enabling, configuring and disabling Windows Firewall 10").

Using the Settings app

Good to know! The built-in protection will turn off for a while (approximately 15 minutes). After this, the system will automatically launch Windows Defender.

In the Local Group Policy Editor

After this, any attempt to launch the built-in defender will display an error.

Good to know! If you set the parameter to “Not configured”, it will begin to function normally.

Important! If you do not find this parameter in the registry branch, create it yourself: RMB on the “Windows Defender” folder → create → DWORD value (32 bits) → enter the name “DisableAntiSpyware” → set its value to “1”.

If you decide to run Defender again, set the value to "0" in the Registry Editor.

Video

The video shows in detail how to completely disable Windows Defender using the Local Group Policy Registry and Registry Editor.

Probably many operating room users Windows systems tenth modification, they noticed that it had its own anti-virus service under named Windows Defender, or Windows Defender. It works on the principle of a regular antivirus, however, sometimes it comes to the point that Windows 10 Defender deletes files, for example, to be downloaded to the hard drive, although the user is absolutely sure of their safe origin. This is where the question of removing this component arises.

How to remove Windows Defender 10 and can it be done?

Let's start with the fact that this service is exactly system component, which, as they say, is “built into” the OS itself. Based on this, we can immediately note that the question of how to completely remove Windows 10 Defender is, in a sense, completely incorrect.

“Native” Windows components cannot be removed under any pretext. But who said that they cannot be turned off as unnecessary? In our case, this is precisely the solution that allows us to get rid of the manifestations of the activity of this annoying service.

What is the easiest way to remove Windows Defender 10?

There are several basic methods for deactivating the Windows Defender service. Keep in mind that ending its work in the same “Task Manager” will not lead to anything, since it will automatically activate after about fifteen minutes or will start along with the system when you reboot.

But it's not all bad. It turns out that the question of how to remove Windows Defender 10, or at least disable it, can be solved quite simply by installing any third-party antivirus package into the system. In this regard, the tenth modification of Windows behaves surprisingly correctly, providing the right to track potential threats specifically to the standard scanner of another developer. If, after installing it, you log into Windows settings Defender, all parameters will be inactive. But keep in mind that after uninstalling the antivirus, Windows Defender will automatically reactivate. But you will have to disable it using more complex methods. First, let's look at the simplest option.

Disabling protection

Let's assume that the user has a third-party security software not yet, but Windows service Defender behaves, to put it mildly, too actively. What to do in this case?

In such a situation, in the question of how to remove Windows 10 Defender, you can use its own settings, which are accessed through the settings settings and the update and security section, where in the Defender settings you simply disable real-time protection by setting the slider to the off position. Again, there is no guarantee that the service will not be activated again.

Using Group Policy Settings

Now let's see how to remove Windows Defender 10 permanently (disable it completely). To do this, you will need to change some group policy settings and work with keys system registry.

To begin, use the “Run” console, in which the gpedit.msc command is written. In the editor, through the administrative templates section and the system components subsection, you need to find the Endpoint Protection service, and on the right side - the disable option. Next double click The window for changing values ​​is called up, where the line “Enabled” is highlighted.

Sometimes, instead of the above parameters, it can be used Windows partition Defender and disable option Turn Off Windows Defender. It all depends on the modification of the system itself (Home, Pro, etc.).

System registry

But that’s not all, because after disabling the above service in group policies, you can often see notifications about its errors appearing. Therefore, when solving the problem of how to remove Windows 10 Defender, you must additionally use the system registry editor by running it as an administrator through the Run console using the regedit line.

The system registry has a higher priority than that, so setting the key values ​​allows you not only to disable the service forever, but also to get rid of errors.

In the HKLM branch through the SOFTWARE and Policies sections you need to find Windows directory Defender, on the right in the editor via RMB, select creating a new DWORD parameter (32 bits), give it the name DisableAntiSpyware (of course, if it doesn’t exist), then double-click to enter edit mode and set the value to “1”, and then save the changes. Using this method is sometimes sufficient to disable the defender, even without using group policies. But to be sure, it is better to apply both methods sequentially. What in the first case, what in the second (meaning policy and registry editors) in mandatory need to be produced full reboot systems.

Instead of a total

As you can already understand, the technique simple shutdown Without installing anti-virus software, it does not give the desired effect. Installing an antivirus partially solves the problem. But if you need to completely deactivate the service, without editing group policies and creating a special parameter Windows shutdown Defender is indispensable in this matter.

The question of how to remove Windows 10 Defender is asked by many users. This is due to the fact that Microsoft’s built-in protection often does not allow you to install various games and applications on your computer.

In addition to unauthorized interference in the list of programs allowed to install and run, Windows’ built-in protection has other disadvantages. She doesn't recognize quickly enough harmful viruses and attacks on computer contents. It also does not have the entire arsenal of countermeasures that independent solutions from antivirus software developers can offer. A reasonable decision is the desire to disable the built-in functionality in order to avoid conflict situations and consumption of system resources.

Ways to disable protection

To disable Windows 10 Defender permanently, the following options exist:

1. Using the Registry Editor. IN command line Enter “gpedit.msc”, then in the menu that appears you need to select “Windows Components” - “Endpoint protection”. This service must be disabled in context menu. The next time you turn on the device, the defender will be turned off, but will continue to send notifications about the need to turn it on.
2. Using the Updates Disabler utility. The program uses a clear interface and supports the Russian language. The functionality of the application allows you to disable both system updates and individual services. In the “Disable” tab, select “Windows Defender” and click the confirm button.
3. Using Destroy Win 10 Spy. The application is designed to disable OS surveillance, but also supports security blocking functionality. To disable Win Defender, you need to select the appropriate item in the “Settings” section.

It is possible to temporarily disable the protection functionality, used for a one-time installation of the application of interest. To do this, you need to find the “Windows Defender” element in the “Update and Security” section and disable the “Real-time Protection” attribute for it. This action will disable restrictions for a while, after which the system will automatically start them again.

Other actions with Windows Defender

After disconnecting, you may need to do the following:

1. Turn off notifications. To disable the annoying reminder about a disabled process, you need to go to the Security and Maintenance Center. There, find the “Security” section and click on the button to disable the corresponding notifications.
2. Restoring the work of the defender. When a notification appears that the application is not working, you can double click mouse to bring up a notification window containing the Anti-Spyware and Anti-Malware processes. Both processes need to be activated by clicking the “Enable Now” button.

Periodically, a situation arises when the user did not manually disable Windows Defender, but it stopped functioning on its own.

This is due to the launch of another antivirus program, which blocked the basic functionality.

If you remove this program from your computer, Windows Defender will automatically continue to work.

Windows Defender is a set of modules from Microsoft designed to monitor suspicious changes and eliminate potentially dangerous components. Available in the program various settings and the ability to turn it off if not needed. This method identical on all versions of Windows.

Windows Defender Basics

The product arsenal is quite rich. Defender allows you to do the following:
monitor autostart;
control security settings;
monitor applications that are activated with IE;
control browser settings;
regulate the operation of various files and add-ons that start with the browser;
monitor the functioning of drivers and services;
regulate the actions of installed and already installed programs;
monitor files and add-ons for registering and launching various software products;
control the order of updating OS modules.

The list of functions may vary depending on the version of Defender and Windows itself.

Enabling Defender

The screenshot shows the window of the product in question. In all current versions The OS menu has almost the same appearance.

If the defender does not turn on, activate it yourself. Find via search bar in the "Start" program "Services" and go into it.

Open the defender service. Go to the Startup type tab, select automatically (delayed launch) from the drop-down list and turn on the defender by clicking on “Run”.

Defender will be activated.

Disabling Defender

Open the "Programs" item.