• How to enter the BIOS on an asus laptop. How to enter BIOS (UEFI) on an ASUS laptop

    Hello everyone, dear friends! Just the other day I purchased a brand new ASUS laptop, in which I had to immediately update the BIOS. Therefore, in this article I would like to tell you how to update the BIOS on your laptop and why it is done this procedure on a new laptop.

    So, sooner or later the time comes when we can no longer tolerate glitches and slowdowns in the operation of the operating system. Some users prefer to take their laptop to a service center to have professionals reinstall the system. Other users choose a more difficult path - independent reinstalling Windows. This article is dedicated to the second category of users. We will figure out how to update the BIOS on Asus laptops. The procedure requires 10-15 minutes, not counting the installation of the operating system itself. Rarely do laptop owners decide to update the BIOS on their own; usually the reason arises - an error that does not allow installing new version operating system. Most often this is error 0x000000A5. If you are well versed in computers, but have not encountered updating the BIOS, then immediately skip to the appropriate section of the article.

    Today's material will cover the following questions:

    — What laptops are the instructions suitable for?

    — When is a BIOS update required?

    - How does the process work? BIOS updates?

    - What to do if BIOS new, but Windows 7 is not installed?

    — What should you pay attention to before installation?

    Reference! The abbreviation BIOS stands for Basic input-output system; in Russian this is translated as Basic input-output system. BIOS is a set of firmware that helps optimize the operation of computer components and also loads and installs the operating system. Here you can read the necessary information about the BIOS itself.

    The base system can even be seen on the motherboard. Look at the photo, the tip of the screwdriver points to the BIOS chip.

    For which Asus laptops is it advisable to update the BIOS?

    The answer is simple - for those with an outdated BIOS. Typically these are ASUS X551 and X553 series laptops. This also applies to older models. In any case, the computer will automatically inform you that you will not be able to install a new version of the operating system on this BIOS. And he will do this with error 0x000000A5. We need to install a new one BIOS version, which will support ACPI, after which the error will disappear and you can safely install the required version operating room Windows systems.

    I will give an example of updating the BIOS to ASUS laptop X553 MA. The update procedure follows the same scheme, so my instructions can also be used by owners of other Asus models. If you have a laptop from another manufacturer, then the only difference will be in the source of downloading the BIOS firmware. I will download it from the official Asus website, but you will need to go to the page of your laptop manufacturer.

    What are the general reasons for updating the BIOS?

    First of all, you need to check if your BIOS has an “OS Selection” option in the “Advanced” section. If it is not there, then you will need an update. In other cases, simply set this parameter to “Windows 7”, and this will complete the instructions for you.

    The following are the two main reasons for installation updated version basic system:

    1. Error. The appearance of code 0x000000A5, which is accompanied by a blue screen of death. Most users switch to the updated version precisely because of this error. In some cases, owners of laptops with built-in Windows 8 or 10 cannot install more old version operating system, in this case updating the base system also helps.
    2. Working with utilities. Some utilities are loaded not from the operating system, but from the BIOS, as is the case with the installation of an operating system. For example, you can take Acronis program, with which you can make adjustments to hard drive, change the number and size of disk partitions. There are a lot of such applications, and new versions require that the BIOS on your computer supports the ACPI boot format.

    This is what the screen of death looks like with error 0x000000A5; as a rule, this is what reports outdated version BIOS.

    The laptop has an updated BIOS, but the error still appears when installing Windows 7. What to do and what to do?

    How to update BIOS on an asus laptop?

    In this case, the cause of the error is incorrect settings for the “seven” in the BIOS itself. This is especially true for owners of laptops with more modern systems. You can fix the situation as follows (try installing Windows 7 after each step):

    Let's start with the simplest thing - reset the BIOS to standard settings. To do this, we need to go to the “Exit” section and select the item called “Load Default Settings”, as shown in the photo below:

    Has anything changed? Then try in the same section changing the position to “OS Optimized Defaults” from “Win8 64bit” to “Win7 OS”. The image below shows the process of changing parameters.

    If you are trying to install an operating system from a flash drive, then you should check the parameter called “USB mode” in the “Configuration” section. Try changing the position from “USB 2.0” to “USB 3.0”.

    IMPORTANT! If the reason was in the third step, and you successfully installed the seventh version of Windows, then after completing the installation, go to the BIOS again and return the “USB Mode” parameter. Otherwise they will disappear USB drivers 3.0, as a result, everything USB devices will operate at reduced speed.

    Updating the BIOS on an Asus laptop - step-by-step instructions

    So, you went into the BIOS, opened the “” section for boot settings and did not find the “OS Selection” parameter there. In this case, we will need to update the BIOS. Looks like required parameter as follows:

    To put latest version BIOS, you need to go to the official Asus website https://www.asus.com/ru /At the top of the screen you will see the products tab, select “Laptops” there and indicate your model in a special field.

    We are interested in the X series, since this is where the 553 MA model belongs. You can always find out the series on the laptop itself or on the box. A window dedicated to our model appeared in front of us - select the “Support” section, and then click on the “Drivers and Utilities” button.

    First, select the type of operating system; here you should put your option. After this, a list of categories with drivers will appear. Everything is simple here - click on the BIOS category, after which a tab opens with latest updates. We select the latest, in my case it is version 214. If you read the article later, you will have more fresh drivers. In general, you need to choose the highest version.

    Install Windows is better just from a flash drive, so the firmware files BIOS is better Just put it on a USB drive. Unzip the archive and place the contents in the root folder of the flash drive. We also need the “Start Easy Flash” utility, which is located in the BIOS. Perhaps you already have it. Otherwise, the utility will need to be downloaded; you will find it on the official website.

    Insert a flash drive with BIOS firmware into the laptop and launch it. In the first seconds of loading, press the “F2” key on the keyboard to get into the BIOS. Here we are interested in the “Advanced” tab, so go straight to it. Here click on the “Start Easy Flash” button

    Now you need to select the firmware file located on the flash drive. It will have exactly the same name as when downloaded. Press the “Enter” key to start updating the BIOS.

    After this, a loading bar will appear on the screen; you just have to wait for the process to complete. Do not turn off the laptop while updating the firmware; it is recommended that it be connected to the network. Once the process is complete, the laptop will reboot. Go to the BIOS again and go to the “Advanced” tab. There is now an "OS Selection" option here. Click on it to set the installation mode to “Windows 7”.

    If you are going to install the seventh version of the OS, you then need to go to the “Boot” section and select the media from which you will install the system.

    If it is a flash drive, then the name will contain the word “USB”; if the disk is “DVD”. It looks like this (in my case a flash drive is used):

    Now you can safely insert media from installation files operating system and go to Windows installations 7. Don’t forget to set the priority to booting from hard drive, otherwise, the computer will try to boot from the flash drive every time.

    As you can see, the update process is quite fast. In 95% of cases, updating the BIOS will help solve the problem with error 0x000000A5. You shouldn’t touch the rest of the settings; follow only the steps indicated in my instructions. Experiments may adversely affect the performance of your computer. Done, now you can fully use the seventh version of Windows.

    Asus is an extremely popular manufacturer of high-quality computer equipment and components from Taiwan. It is known that at least a quarter of laptops in Russia belong to this company. Asus motherboards are equipped with various BIOS modifications. In each case, you can use several ways to access this system. But often novice users of ASUS products have problems opening the BIOS. You will have to figure out how to open this system, as well as find out the recommendations of professionals. Perhaps the most popular way is to go to the BIOS of your personal laptop or netbook. They log in when they turn on the computer, but press the DEL key. You need to do this quickly, literally in about five seconds, otherwise the screen will switch to standard mode work.

    Then you can perform the necessary manipulations with the BIOS. Before starting to list other ways to operate the BIOS on Asus laptops, it’s worth recalling some practical recommendations, which will be very useful for beginners. First, you should remember that it is the Del key that is most often used as a system customizer. There are special cases when this button does not work, and then you can change the “default key” to any other in the system settings. Secondly, if the computer was released before 2008, then you should press the F10 or F12 button, not Del. It will open access to " electronic version» motherboard. Thirdly, if none of these keys provide access to the BIOS, you should restart your computer and contact Asus technical support.

    How to enter bios on an asus laptop? After all, the Windows system loads very quickly, and sometimes you can’t catch the right moment? In fact, if you were unable to press the BIOS call button in time, you should simply restart the computer and re-type the desired key. After this, you can already enter the BIOS system. It should be remembered that this is, first of all, basic system data output and input; This is exactly what this abbreviation stands for. When we press the power button to turn on the computer, the system immediately begins recalculating and loading the operating system of the Asus laptop. Some novice users ask how to enable BIOS on an asus laptop. This is somewhat incorrect - the BIOS is constantly running in parallel with the main operating system.

    How to enter the BIOS on an Asus laptop? If everything is done correctly, the famous “blue window” of the BIOS will open with the most important settings for the operation of the operating system. It was found out experimentally that it is the F2 key that allows you to slow down the boot somewhat and, accordingly, allows you to enter the BIOS window on time. The fact is that most laptop manufacturers today have already reconfigured their products to suit the tastes of consumers. Many users agree that F2 allows you to open the BIOS window faster than Del or F10. The user himself can select the most optimal key combination for his keyboard in “User Settings,” which will automatically forward to the BIOS. If you can’t do everything yourself, then you can refer to the instructions or various manuals on this topic.

    How to enter the BIOS on an asus laptop? Often Asus netbooks and laptops enter the BIOS settings window by pressing the F2 key immediately after turning on the power. One of the main features of this technique is the disorder and some complexity of using the BIOS. ordinary users. It should also be taken into account that, in principle, it will be more difficult to enter the BIOS from Asus laptops, since the main parameters of the Windows operating system are loaded quite quickly, and you will not be able to get into the desired BIOS window until the next reboot. You should also take into account the fact that the processor of a compact computer often contains specialized, advanced security settings, touchpad control systems, and an additional operating system that performs instant download Windows.

    It was found out experimentally that it is the F2 key that allows you to slow down the boot somewhat and, accordingly, allows you to enter the BIOS window on time. The fact is that most laptop manufacturers today have already reconfigured their products to suit the tastes of consumers. Many users agree that F2 allows you to open the BIOS window faster than Del or F10. As mentioned above, it is sometimes used special combination keys, which can be set by the user himself, or which is provided by the laptop manufacturer. How to enter the BIOS on an Asus laptop if a key combination is provided, but it is not known which one? There are several ways out here. First, you should review the instructions again - sometimes information is given on last pages or printed in small print.

    Secondly, you can contact official technical support. To do this, you should either call hotline, or write to the site operator asking to clarify the situation. This option is a win-win: reliable in terms of working with clients Asus company always helps its users deal with technical problems. Thirdly, you can contact special computer equipment repair shops. It is there that you can consult about the required key combination to enter the BIOS. Perhaps, in most cases, users of Asus laptops will find it easy to enter the BIOS, and in case of unforeseen situations, there are useful and very practical recommendations!

    Every year, ASUS products are in increasing demand among consumers. In addition to high-quality assembly, full-time job computer system provides it competent setup all parameters, initial stage which is correct entry in the BIOS on an Asus laptop.

    What is BIOS

    The abbreviation BIOS stands for basic input and output system. It acts as an integral part of the software of a computer system. Therefore, when answering the question of how to enter the BIOS on an ASUS laptop, you need to clearly understand what you have to deal with.

    The BIOS is located on the motherboard chip and has its own energy source - a battery. This system acts as a data repository and guarantees that necessary information will not be lost if the device malfunctions. All Asus system settings are saved on it. It is a permanent storage device.

    Home BIOS function- timely identification and recognition of all constituent elements of the system:

    • RAM;
    • video cards;
    • processor;
    • devices inside the laptop;
    • and external connected accessories (flash drive, disk).

    The BIOS checks all communications between them and only then proceeds to launch the operating system, transferring control to the bootloader. In other words, it acts as a key link between devices and the operating system.

    How to enter BIOS on an ASUS laptop

    There are many ways to enter the BIOS using various key combinations. But here you need to take into account the fact that depending on the model or modification of the laptop motherboard, the entire sequence of actions may differ significantly. In most cases, the keys Del, F2, Ctrl, Esc are involved in loading parameters.

    Let's look at several ways by which you can enter the BIOS on an ASUS laptop as quickly as possible:


    Entering BIOS from OS Windows

    IN different versions There is a different way to get into the BIOS on an ASUS laptop, so we’ll look at each one separately.

    Windows 7

    Separately, it is worth noting the ability to enter the BIOS when the laptop is turned on.

    If the Asus is equipped with Windows 7 or version XP, then entering the command “ msinfo32" You can set it in several ways:

    • Enter " msinfo32» in the search bar Start and then press Enter.
    • Set startup combination Task Manager Ctrl + Shift + Esc or Ctrl + Alt + Delete, go to the “section File" and select " New task(Run...)" In the window that opens, in the input line, type “ msinfo32» and confirm with the OK button.
    • Press the key combination + R. In the input line enter " msinfo32" and select the OK button.

    As a result of entering the keys correctly using any of the methods, a window will open with all the data about the OS and version of the BIOS used on the laptop. Next you just need to select required keys under installed type BIOS. A good hint is the selection of buttons for logging into the system presented below.

    Pressing one of these key combinations simultaneously while booting into Windows 7 or XP will open the BIOS main menu.

    Windows 8

    First of all you should do proper connection external device, since to enter the BIOS menu on an ASUS laptop with Windows 8 installed, it will be correct to use UEFI settings.

    To start the BIOS, you will have to perform the following sequence of actions:

    1. On Control panels desktop select the option " Options» ( Settings).
    2. At the bottom of the window that opens, click “ Change computer settings» ( Change PC settings).
    3. In the menu that appears, select “ General» ( General), then press “ Special Boot Options» ( Advanced startup), and after Reboot now(Restart now).
    4. After the reboot is complete, you need to select the “ Diagnostics» ( Troubleshout).
    5. In the window that opens, find “ Additional options » ( Advanced options).
    6. Next select “ UEFI Firmware Settings» ( UEFI Firmware Settings).
    7. Finally, in the last window, click on the Restart button.

    And if all stages step by step instructions are met, the BIOS will start immediately after the system is rebooted.

    Windows 10

    In the updated Windows versions 10 it is also possible to enter the BIOS settings by issuing such a command to the laptop before rebooting it. It is necessary to hold down the button, after which the OS will go to the BIOS menu.

    BIOS partitions

    Having figured out how to enter the BIOS software on an ASUS laptop, a blue partition window opens. Among which:

    • Power responsible for electricity consumption and availability DC voltage in the included elements of the system.
    • Main contains information about the type, volume installed memory, date and time.
    • Boot determines the order in which system parameters are loaded.
    • Advanced includes advanced type settings. For inexperienced users You should not experiment with this section.
    • Exit offers to leave the system.

    Confirm the selection of any of the sections by pressing Enter. The cursor arrows on the keyboard are responsible for moving between sections. To make changes to the selected type of menu section, use the PgUp or PgDn keys.

    Conclusion

    If you have recently acquired an ASUS laptop, then basic knowledge will help you answer many of your questions and help you access the system settings. English language and instructions for computer device, which comes included. And competent work with software BIOS will help you make timely necessary changes to the system and troubleshoot possible problems.

    Video on the topic

    Good day!

    ASUS laptops are one of the leaders on today's market ( good value price and quality). Well, since they are in demand, there are always enough questions about them...

    In today's article I want to touch on one of them - namely, entering the BIOS (or UEFI on newer device modifications). Most often, this must be done to boot from installation flash drive(for example, to update/install Windows OS), to disable some devices, view the model of components, etc.

    Note : The article is replete with explanatory screenshots. Some details that you see on the screenshots may differ slightly from yours, depending on the software version of your device (but all steps will be the same for laptops of this brand).

    Method 1

    1. First, turn off the laptop;
    2. Then hold down the F2 button;
    3. Without releasing the F2 button, turn on the device;
    4. Do not release the F2 button until the main BIOS/UEFI page appears.

    Note: instead of holding down the F2 key, you can press it often immediately after turning on the laptop. The action will be similar, you should also see the main BIOS settings page.

    As for choosing the media to boot, you need to open the "BOOT" section. Below I will consider the 2 most popular software options.

    Newer ASUS laptops use UEFI instead of BIOS: there are several links at the bottom of the screen - click on "Advanced Mode (F7)" (you can also press F8 to select the media, it will open boot menu where you can choose everything available drives to download).

    In the "BOOT" subsection in the "Boot Option #1" line you can select and specify the media from which you want to boot. After changing the settings, do not forget to save them (F10 key or select "Save and Exit" from the menu (i.e. save settings and exit)).

    In older laptops, you will find the familiar BIOS: here you can immediately open BOOT section and indicate the required drive (flash drive) in the “Boot Option #1” line. Saving settings can also be done using the F10 key.

    Method 2

    This method is somewhat different from the first: the fact is that we will not open the BIOS itself, but the boot menu: from it you can quickly select the flash drive or disk from which you want to boot (very convenient, and there is no need to change any BIOS settings).

    I note that the boot menu also contains a link to enter the BIOS. So, if you have a problem with the F2 key, try using ESC!

    1. First of all, we also turn off the laptop;
    2. Then we press ESC key;
    3. Without releasing ESC, turn on the laptop;
    4. We hold the ESC key until the boot menu appears in front of us.

    The boot menu is a simple list of devices (disks, flash drives, etc.) from which you can boot.

    In my example below, there are 3 lines:

    1. Enter Setup - enter the BIOS/UEFI settings.

    Method 3: For Windows 10 users

    If the previous methods did not work for you (for example, this may happen if there are problems with the keyboard), then you can resort to others. Below are a couple of options for those who use the modern Windows 10 OS.

    Option 1

    1. Open the START/Settings menu;
    2. Then the "Update and Security" section;
    3. This section should have a "Recovery" tab;
    4. Look for the heading "Special boot options" and click the "Restart" button.

    After rebooting the device, it will automatically pop up blue screen With special options downloads. Select an option , and then . See screenshots below.

    Option 2

    1. Press a combination of buttons WIN+R;
    2. In a pop-up window "Run" enter the command powercfg.cpl ;
    3. The "Power Options" settings window should open: in the menu on the left, select the "Power button actions" option.

    Change settings that are currently unavailable

    Now the shutdown options should become active: you need to uncheck the "Enable" quick start". Then save the settings and restart your laptop.

    Disable fast startup

    After reboot you will see a blue screen with several options: click option "Select other options" , or immediately "Troubleshooting" , if such a download option is immediately available (See two screenshots below).

    UEFI Firmware Settings

    Agree to reboot. After this, the laptop will automatically open home page(Main) BIOS settings.

    That's all, actually. I hope one of the options will definitely work for you...

    Additions, as always, are welcome...

    That's all, good luck everyone!

    Good day to you, my dear friends. Today we will talk about how to enter the BIOS on an Asus laptop, and I made this article for three categories of readers:

    • First of all there will be detailed instructions for those who have never done this, but circumstances or professional curiosity force them to close this gap in knowledge.
    • For those who have at least once independently entered the system settings, this article will also be interesting, since I will present you with several methods and some of their nuances.
    • And finally, for that category of laptop owners who prefer to contact service centers, it will also be useful to know that launching the BIOS is actually not difficult at all and it’s time to master it.

    BIOS provides the user with ample opportunities that are not available in operating system. In any case, the changes made to it will be reliably protected. What you can do in the BIOS is a separate topic, but now it is most often used to configure booting from a flash drive when restoring or installing a new Windows.

    This need may arise when you buy an Asus Zenbook, and it already has the Ubuntu OS, which is unfamiliar to you, installed.

    An original approach to accessing the BIOS

    Let everyone have their own interest in, and our main task for today is to log into the system of these basic settings, which he is. In Asus laptops this is done several times. in an unusual way, but first, as usual, you need to make sure that the power supply is stable during the reboot. And also, if you have Asus Transfomer, do not forget to connect the keyboard.

    • To get into the BIOS, you need to turn on the PC while pressing the “F2” key. This method the good thing is that you don’t have to seize the moment when quick reboot systems;

    • If you have Windows 10, you can also select the “Restart” action while holding down the “Shift” key

    In addition, there are other options (which you can also find on laptops from other manufacturers):

    • After turning on the PC and the Asus logo appears, we begin to quickly and rhythmically press the “F2” or “Delete” button (possibly the combination “Fn + F2”, or other function buttons). In the same situation, use “Esc”. This will display the boot menu, where we need to select “Enter Setup”.
    • If you still don’t have time to press necessary buttons(this usually happens in Windows 8 and 10), then go to the “Power Options” setting, and after unlocking unavailable functions, uncheck “Fast Boot”.

    Leaving UEFI

    IN modern models laptops, when performing the above steps, you may not find the usual AMI BIOS. Instead, you will see classic UEFI. This means that your laptop has the mode enabled Secure Boot. In principle, UEFI allows you to solve most problems, such as changing the basic system settings. But if you need to get into the “normal” BIOS, I’ll now tell you how to disable Secure Boot on example Asus VivoBook:

    • F7 (Advanced menu) → “Boot” section;
    • in the “Secure Boot” subsection, switch “Secure Boot” to the “Other OS” state;

    • in the subsection “CSM (Compatibility Support Module)” → “Launch CSM” to the “Enabled” position. Here:
    • “Boot Device Control” → switch to “Legacy OpROM only” (or “UEFI and Legacy OpROM”);
    • “Boot from Storage Devices” → switch to “Legacy OpROM first” (or “Both, Legacy OpROM first”);

    Press “F10” and save. Reboot the PC and enter the BIOS.

    I hope, dear friends, that my information was new, interesting and, most importantly, useful. Now, armed with such an arsenal of knowledge, you can easily enter the BIOS on any Asus laptop.

    Good luck to you in everything, and see you soon on the pages of my blog!

    Read more: