Programs for amd processor. Programs for overclocking an Intel processor

Need for testing computer processor appears when performing an overclocking procedure or comparing characteristics with other models. Built-in tools operating system they don’t allow you to do this, so you need to use a third-party software. Popular representatives of such software offer several analysis options to choose from, which will be discussed further.

I would like to clarify that, regardless of the type of analysis and the software used, when carrying out this procedure, loads of different levels are applied to the CPU, and this affects its heating. Therefore, we first advise measuring temperatures while idle, and only then moving on to the main task.

A temperature above forty degrees during idle time is considered high, which is why this indicator can increase to a critical value during analysis under heavy loads. In the articles linked below you will learn about possible reasons overheating and find solutions to solve them.

We now move on to consider two analysis options central processor. As mentioned above, CPU temperature increases during this procedure, so after the first test we advise you to wait at least an hour before starting the second. It is best to measure degrees before each analysis to make sure that there is no situation of possible overheating.

Method 1: AIDA64

AIDA64 is one of the most popular and powerful programs for monitoring system resources. Its tools include many useful functions, which will be useful for both experienced users and beginners. Among this list there are two modes for testing components. Let's start with the first one:

Let's touch on the most important question– the value of all obtained indicators. Firstly, AIDA64 itself does not notify you of how productive the tested component is, so everything is learned by comparing your model with another, more top-end one. In the screenshot below you will see the results of such a scan for the i7 8700k. This model is one of the most powerful of the previous generation. Therefore, it is enough to simply pay attention to each parameter to understand how close the model used is to the reference one.

Secondly, such an analysis will be most useful before and after overclocking for comparison. big picture productivity. We want to pay special attention to the values "FLOPS", "Memory Read", "Memory Write" And "Memory Copy". FLOPS is measured general indicator performance, and the speed of reading, writing and copying will determine the performance of the component.

The second mode is stability analysis, which is almost never carried out just like that. It will be effective during overclocking. Before starting this procedure, a stability test is carried out, as well as after, to ensure normal functioning component. The task itself is performed as follows:

Open the tab "Service" and go to menu "System stability test".

Check the box at the top necessary component for checking. IN in this case This "CPU". Follows him "FPU", responsible for calculating floating point values. Uncheck this item if you do not want to get an even greater, almost maximum load on the central processor.

Next, open the window "Preferences" by clicking on the corresponding button.

In the window that appears, you can customize the color palette of the graph, the rate at which indicators are updated, and other auxiliary parameters.

Return to the testing menu. Above the first graph, check the boxes for those items about which you want to receive information, and then click on the button "Start".

On the first graph you see the current temperature, on the second - the load level.

Testing should be completed in 20-30 minutes or when reaching critical temperatures(80-100 degrees).

Go to section "Statistics", where all the information about the processor will appear - its average, minimum and maximum value temperature, cooler speed, voltage and frequency.

Based on the numbers obtained, decide whether it is worth further overclocking the component or whether it has reached its power limit. Detailed instructions You will find recommendations for overclocking in our other materials using the links below.

Increasing processor performance for some - the desire to have the highest available characteristics PC, and for others - a necessity for stable and comfortable work. Both categories of users need proper overclocking, otherwise it may lead to unpleasant consequences and financial waste instead of the expected savings.

First of all, in this case you will need good program for overclocking, which will be compatible with motherboard. We talked about similar programs for overclocking Intel processors, and now we want to look at analogues for AMD.

This program created specifically by AMD for users who want to get a performance boost. It is completely free, but at the same time truly effective and functional.
Let's start with the advantages, of which this program has plenty. For AMD OverDrive it doesn't matter which one you have. motherboard, the main thing is that the processor fits. Full list The supported processors are as follows: Hudson-D3, 770, 780/785/890 G, 790/990 X, 790/890 GX, 790/890/990 FX. Actually, products are supported both new and “not the first freshness”, i.e. those released 5 years ago or more. But the biggest advantage of the program is the list of its features. It has everything for high-quality overclocking: control sensors, testing, manual and automatic overclocking. More detailed description You will find opportunities by clicking on the link located just below.

The only downside that can be noted is the lack of Russian language, which, however, does not interfere with most home overclockers. Well, and the fact that Intel owners, unfortunately, will not be able to use AMD OverDrive.

ClockGen

KlockGen is a program that, unlike the previous one, is not as beautiful or convenient, but the main thing is that it is functional. In comparison with many small analogues, it is of interest because it works not only with the FSB bus, but also with the processor, RAM. For high-quality overclocking, there is also the ability to monitor temperature changes. The lightweight and compact utility supports many motherboards and PLLs, does not take up hard disk space and does not load the system.

But not everything is so wonderful: there is no Russian language again, and ClockGen itself has not been supported by its creator for a long time, so new and even relatively new components are incompatible with it. But old computers can be overclocked so that they get a second life.

SetFSB

This program is universal, as it is suitable for both Intel and AMD. Users often choose it for overclocking, noting such advantages as support for many motherboards, simple interface and use. One of the main advantages is that SetFSB allows you to programmatically identify the chip. This is especially true for laptop owners who cannot recognize their PLL. SetFSB works in the same way as ClockGen - before rebooting the PC, which significantly reduces possible risks, such as failure of the motherboard, overheating of devices. Since the program is still supported by the developer, he is also responsible for the relevance of supported versions of motherboards.

The disadvantages include the fact that residents living in the Russian Federation will have to pay approximately $6 to use the latest version of the program, and even after purchase there is no need to wait for Russification.

In this article, we talked about three programs that are suitable for overclocking an AMD processor. The user will have to choose a program based on the processor and motherboard model, as well as their own preferences.

As you already understand, we specifically selected programs that can work with hardware from different years of production. For older computers, ClockGen is perfect, for those that are newer - SetFSB, and for owners of medium and new ones, AMD OverDrive will help.

In addition, the capabilities of the programs also differ. ClockGen, for example, allows you to overclock the buses, RAM and processor; SetFSB additionally helps identify PLLs, and AMD OverDrive has a huge number of functions for full overclocking with a quality check, so to speak.

Sooner or later there comes a time when the computer processor stops responding. system requirements programs and even more so games. This problem, of course, can be solved by replacing outdated hardware, but not everyone can afford such a radical method. That is why many users increasingly prefer not to buy expensive components, but to so-called overclocking.

Fortunately, CPU overclocking programs have been around for a long time. open access. Moreover, now so many similar utilities have been released that an uninitiated user can simply get confused in them. To prevent this from happening to you, read this article. Here you will find a list of the most current programs for overclocking the processor and can use them to give your computer a second life.

A little theory

First, you need to understand what the essence of overclocking is and why it is not as dangerous as is commonly believed. The fact is that all processors by default operate at only 60-80% of their capacity. maximum power. Thanks to overclocking you can bypass this limitation and achieve a noticeable increase in productivity.

Of course, it is almost impossible to obtain the maximum possible increase in power at home and without the proper knowledge. However, you can easily count on a 20-30% increase in performance, which in most cases will allow you to achieve an acceptable FPS value in modern games on a relatively outdated computer.

At the same time, by overclocking the processor through the program, you reduce the risk of burning something in your computer to a minimum. The main thing in this matter is to choose a utility specifically for your device, so pay special attention to this.

ASRock OC Tuner

This is a program for overclocking Intel processors, different user-friendly interface and excellent functionality. It is important that ASRock OC Tuner has tools not only for overclocking, but also for monitoring the system status. Even if the processor temperature rises to a critical level, you can immediately notice it and take appropriate measures.

Another advantage of the program is its ease of use. To overclock, you just need to open the Overlocking tab and set the desired values for the bus multiplier and processor frequency. After this, all you have to do is press the GO button and wait until the utility makes all the appropriate changes.

By the way, in ASRock OC Tuner you can not only increase processor performance, but also calibrate the PCIE bus frequency. This is done approximately according to the same principle.

SetFSB

This utility suitable for owners of modern computers who want to squeeze even more power out of their machine. Therefore, SetFSB is simply an excellent program for overclocking other devices from the same series, the frequency of which is limited by default by the manufacturer. In addition, the utility is compatible with almost all modern motherboards, which makes it truly universal.

Another benefit of SetFSB is that any changes you make will be reset when you restart your computer until you save them. This way, you can test the operation of the processor after overclocking and only then, making sure that it is functioning without failures, confirm the changes made. Simply put, even if you overdo it and your PC reboots, unable to withstand the increased load, all settings will be reset to factory settings.

MSI Control Center II

This utility is designed to monitor the status and configure chipsets manufactured by MSI. You can use this program to overclock the processor installed on the motherboard of this company.

The application interface is divided into two categories: Overclocking and Green Power. As you might guess, it is the first one that is intended for overclocking. Here you can not only change the processor frequency, but also change the voltage supplied to it, thereby increasing the stability of operation at maximum loads. In addition, in the same menu you can see the current temperature of various components of your PC, find out the rotation speed of coolers and calibrate

As for the Green Power section, it is monitoring the efficiency of energy consumption. There are also various options that allow, for example, to turn off the LED indicators on the motherboard.

By the way, if you don’t want to bother with manually overclocking the processor (and the entire system as a whole), you can use one of the preset MSI operating modes Control Center II. Just select one of them (Default, Cooling, Game or Cinema), and the program itself will make all the necessary changes.

CPUFSB

CPUFSB is a program for overclocking a processor in Russian, which immediately sets it apart from many competitors. The utility is designed to work with devices manufactured by Intel and allows you not only to increase their frequency, but also to save several modes for different situations, and then switch between them. As with SetFSB (and many other applications), any changes you make will be reset when you reboot the system until you finally approve them.

Also, the advantages of the program include support for even the most exotic motherboards. If no other utility can work with your chipset, then you should definitely try overclocking using CPUFSB.

The disadvantage of the program is the need to manually enter the PLL of your processor. Of course, this information can be previewed in third party application or even disassemble the system unit and read the value on the sticker, but all this is not very convenient.

ASUS TurboV EVO

An application similar in its functions to MSI Control Center II, but for chipsets from ASUS. As you probably guessed, ASUS TurboV EVO is also a processor overclocking program with an excellent set of additional features.

Essentially, the utility gives you access to BIOS settings straight from your desktop. At the same time, all options that in one way or another can harm the performance of the computer are carefully hidden, which allows you to use the program without unnecessary risk, even without specific knowledge.

Interesting feature ASUS TurboV EVO is the ability to customize not only general frequency processor as a whole, but also perform the same operation for each core. Not to say that there is a serious need for this, but still sometimes such a function can come in handy.

Again, like MSI Control Center II, the ASUS program has an automatic overclocking function. With the press of one button, you can select the ideal timings and voltage for your processor, thereby increasing its frequency.

SoftFSB

And this utility is suitable for the “lucky” owners of very outdated computers. You can easily use this program for overclocking Pentium processor or other antique devices.

The SoftFSB interface is very modest. Here you will not find a temperature sensor, cooler monitoring, or any other bells and whistles. But the program copes quite well with its main task, that is, it allows you to overclock the processor to higher frequencies.

Now about the cons. SoftFSB is a very old utility, so it is highly likely that it will not work properly with modern hardware and latest versions operating systems. Moreover, the developers have long stopped releasing updates for their brainchild, so don’t expect anything to change for the better in the future. Thus, the application can be recommended only to owners of rare computers and to no one except them.

AMD OverDrive

As its name suggests, AMD OverDrive is an overclocking program AMD processors. The most interesting thing about it is that you can independently choose your level of overclocking awareness and thus gain access to a different set of settings. For example, inexperienced users will only be able to monitor the state of the system, while professionals will have the ability to change the bus frequency and clock multiplier.

In addition, the program allows you to test an overclocked processor. This opportunity, together with different access levels, reduces the risk of harming the operation of the computer to a minimum.

ClockGen

Small but very useful program for overclocking AMD processors. Despite the simple interface, the utility allows you to perform overclocking, as well as monitor the state of the computer running on higher frequencies. In addition, the application practically does not load the system and takes up very little space on the hard drive.

Unfortunately, ClockGen does not support the Russian language, but this is by no means the worst thing. Much worse is that the developers have stopped supporting the program, which means it will not be able to work properly on modern computers.

Overclocking without a program

It’s worth saying a few words about overclocking using the BIOS. Of course, this method is not as convenient as the software one, but it is still worthy of a little mention. Overclocking the processor through the BIOS is carried out by changing the bus multiplier, as well as the value of the supplied voltage. The problem is that these options are not open on all devices and not in all BIOS versions.

Another drawback this method- this is that you will have to increase the processor frequency in small steps. Each time, after increasing performance a little, you should restart the computer and wait until the operating system fully starts. As soon as instead of the usual Windows icon will appear blue screen, you will have to go into settings and return the frequency to the previous step. In general, it’s still a hassle.

Be aware of the risks

Despite the fact that processor overclocking utilities make the overclocking process as safe as possible, you should still not forget about the risks associated with this procedure. Here are some tips to help you avoid burning your computer:

Use only applications that are compatible with your computer. If the description indicates that this program is for overclocking Intel processor, don't try to make it work with an AMD device.
If the utility you choose does not have a temperature monitoring tool, then you should use a third-party program for this purpose. For example, CPU-Z will do an excellent job with this task.
Don't panic if something goes wrong and the computer reboots itself. Just reset the settings and everything will be normal again.

Also, do not forget to periodically check the temperature of the overclocked processor. It is best to do this under load in games or demanding programs.

Processor performance is calculated by the number of operations per second. A quantitative indicator of the operations performed is the frequency, measured in hertz. The larger this value, the faster the system as a whole works. As a rule, processor manufacturers never use maximum possibilities clock frequency and leave a certain reserve to increase the service life of the component and save energy. However, there are special programs for overclocking Intel processor, which can significantly improve the performance of the entire system, and in this case the software (game) will launch and work much faster. This allows you to improve your computer without purchasing new components and use their maximum capabilities.

Before you start overclocking the processor, you need to know for sure the limits of the reserve clock frequency and the real indicators. If this is neglected, the processor may burn out and cannot be repaired. Intel Company in new lines it produces processors that provide for changing the frequency in the BIOS. It is these models that lend themselves to overclocking best.

Should not be installed clock frequency to the maximum permissible value. And although the system will work significantly faster, the intensity of the work will lead to increased heating of the component part and can lead to malfunction. In this case, you must take care of the installation powerful cooler, which will cope with the heat generated. And if the power supply was purchased without a power reserve for system unit, it is also recommended to replace it with a more powerful one.

In order to overclock your processor without difficulty, you need to follow three steps:

update the BIOS to the latest available version;
install qualitatively good system cooling;
with the help special programs(or in BIOS) view the initial frequency value.

In order to find out the current (factory) clock frequency of the processor and check the limits to which it can be overclocked, you can use free utility CPU-Z, which can be downloaded from the official website.

Before overclocking the processor, you can also use the S&M program, which can demonstrate the behavior of the processor when maximum loads.

If you have completed all the prescribed measures, you can proceed to directly overclocking the Intel processor. This can be done using one of three special programs, which are the most secure and will not cause any harm to the system. Let's look at them in more detail.

This program allows almost any user to overclock, because its interface is intuitive. But the developers recommend not to experiment inexperienced users to avoid possible troubles. SetFSB allows you to overclock any processors, but is not suitable for all motherboards, on which a lot also depends when increasing the clock frequency. Before starting the process, official page Use this utility to make sure your motherboard is supported.

Among the advantages of this program are its small size (only 300kb), regular release of updates and ease of management.

select the clock generator model of your motherboard from the “Clock Generator” pop-up list;
Click on the “Get FSB” button to display two sliders displaying the clock speed of the processor and the system bus;
gradually move the slider at small intervals and monitor the current processor temperature using additional utilities;
After finding the optimal boundary, click on the “Set FSB” button.

It should be noted that when you restart the computer, these settings will be reset and you will need to restart programs with saved settings. To avoid this, you can put this program in autorun.

This program has a large number tools and supports much more models motherboards than the previous program. Also, due to the presence of a Russified version, the interface will be as clear as possible. But CPUFSB is paid product and to use it, it must be purchased.

To overclock a processor using CPUFSB, follow these steps:

using the drop-down lists, select your motherboard model and PLL chip;
click on the “Take frequency” button and you will see the current processor and bus frequency;
by moving the slider, select a value that will correspond to the permissible processor heating;
Click on the “Set frequency” item.

This program, like the previous one, after rebooting the system, resets the system settings and to increase the processor frequency, you must repeat the operation.

This utility also helps in solving the issue of overclocking the processor. A significant disadvantage of SoftFSB is the fact that it is not supported by developers, and it is not a fact that it will fit new models of processors and motherboards. Also, its interface is entirely in English (there is no support for the Russian language) and it is designed for experienced users.

To overclock the processor, all actions are performed similarly to the previous program.
If you have never overclocked a processor, experts strongly recommend using utilities that are written by component manufacturers and under specific models.

This publication will discuss another third-party work optimization tool. multi-core processors – free program CPU Control . “More” – because the author has already touched on this topic, see about ICEAffinity. The brainchild of German developer Matthias Koch ( Matthias Koch), Russified utility CPU Control will be especially interesting for beginners computer users due to the presence of a multi-auto optimization mode, but first things first.

"Why is this necessary & what will I get from it?"

This issue was raised in the published article, so I’ll defragment what was said into a couple of paragraphs:

Some applications do not support multi-core mode, so for correct operation you need to manually allocate a separate processor core for them. Another “problematic” option is that the motherboard initializes the cores asynchronously. In both cases, user intervention is required.

By default, Windows gives all running processes equal priority in the use of processor power. Which is not entirely correct when running resource-intensive applications, for example, when your favorite Call of Duty is hampered by an antivirus along with a dozen other “minor” software. CPU Control will help distribute processes proportionally across cores, which will directly affect the overall performance of the system.

Important!

The utility supports dual- and quad-core processors, but, according to reviews, it works correctly on 6–8 cores.

We optimize

1. First you need to download the utility, for example, from my Catalog the best software. There are no “tricks” in the installation, so click “ Next" ("Next") until complete installation. By the way, the program does not “litter” the registry, i.e. it is portable and portable on removable drives.

2. After launching, first of all click on " Options" ("Options") and Russify CPU Control through " Languages" ("Languages") → "Russian". Next, in accordance with the following screenshot, check the boxes next to " Autostart with Windows ", "Minimize" And " 4 cores" (for four or more cores). It is clear that if the CPU is dual-core, there is no need to activate “4 cores”.

3. Having closed "Options", in the main application window we see 5 CPU control modes: " Auto", "Manual", "CPU1" (all processes run on the 1st core), " CPU2" (all processes are running on the 2nd core) and " Disabled" (without optimization). The last three modes are not interesting to us, so we will focus on the first two.

For beginners the author recommends simply selecting the " Auto " and, closing the window, check for future Windows downloads, to CPU Control was in the list of startup applications (!). This is easy to do, for example, through any version, look in the menu bar " Tools" → "Startup manager"(if you need to add an application, click the applet" Add").

4. For those who like to dig around this simple utility gives you a chance to “expand”: in auto mode there is 9 basic profiles-variations in the distribution of processes across cores (screenshot below). If you have time and open on the " tab Performance"Task Manager ("Ctrl + Alt + Del" ), to monitor the results, you can choose the optimal profile for your system.

5. The most advanced users who want to achieve maximum results in increasing system performance using this method, will probably be interested in the " Manual ". In this mode, you independently distribute processes among cores or groups of cores. It’s simple: select the process(es) and use the right mouse button to “hang” it on the right kernel or a combination of cores. For example, when selecting " CPU1" the process will hang on the first core when selecting " CPU3+4" – on the third and fourth cores, etc.

Here good option ranking for a 4-core PC: leave system processes to the 1st core, “spread” the most resource-intensive applications (such as Photoshop) between all cores (option as in the last screenshot), and “average” applications like antivirus scanner put in your hands combinations for 2 cores, say, " CPU3+4". Dispatcher Windows tasks will help to do right choice. For ease of monitoring, when the "tab" is open in the Manager Performance", check that the function " According to schedule for each CPU " (see "" → searched " According to schedule for each CPU").

In general, experiment and your efforts will definitely pay off handsomely!